SB-02 Includes Only:
- 4 x SuperPro 7500
- Built-in Industrial PC with Windows 7
- 19" LCD Display
- Keyboard and mouse
Features with All Optional Accessories:
- Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed.
- Auto Tray Device An extension of the fixed tray. it includes tray-in and tray-out and users can put 10 trays into the device. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 15 JEDEC trays.
- Tape-In Device YAMAHA pneumatic feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed.
- Tape-Out Device Connects to a SuperBOT2 or SuperBOT3 for fully automatic operation. 8 - 32 mm tape widths can be used with the device. Output reel is sealed with heated tape.
- Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and up to 4 tubes can be operated at once (optional).
- Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and up to 4 tubes can be operated at once (optional)
- Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips
- Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional). Tray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional).
- High Throughput SuperBot 2 is based on a high performance servo system that can program up to 1200 UPH (for devices with programming times less than 36 sec) and is suitable for both small and large capacity devices. It can be operated 24x7 and can provide throughput of 863,000 UPM.
- High Performance Programmers SuperBot 2 is equipped with four SuperPro 7500 high speed universal programmers, with a total of 16 sockets in the system. Utilization of ARM11 32bit MCU combined with an internal Linux operating system makes them the most advanced and versatile programmers in the industry.
- LAN Operation LAN port enables remote project loading, quality monitoring, volume control, file security. Technical departments can remote control programming operations and processes, including downloading project file, command execution, project settings, and obtain real time information to achieve production goals.
- Better Yield Semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Algorithms are performed with state machine architecture constructed with FPGA to achieve an ultrahigh programming speed. Along with the low voltage components selection, they program devices down to 1.2 volts.
- Powerful and Intelligent Software User-friendly software with graphical interface cuts learning curve. Setup data saved for next operation. Software also includes resourceful log table, convenient production and quality tracking, authorization, flexible stopping strategy for bad socket or module.
- Chip Size Devices between 2 x 2 mm to 25 x 25 mm can be programmed. SuperBot 2 supports the SOT23 package which measures only 2 x 3 mm
- Short change-over time I/O devices and socket adapters are easily interchangeable and socket positioning can be performed automatically. Tape-in feeder changeover time is below 10 minutes and laser marker changeover time between tray to tape is under 15 minutes.
- Socket Cost and Investment Cost recovery in short period with low investment in the beginning as socket adapters are universal for up to 144 pin chips.
SuperBot 2 is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors.
The value of a programming product is a combination of price, the number of devices supported, programming speed and reliability.
