Locoloc (Loos), #3-H, 1/4" - 1/2" Copper and Aluminum Hydraulic Hand Swager Tool
Exerts 14 tons of pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage. A relief valve prevents over-compression.
The advanced-retract control for the ram is located in the moveable handle. It is operated by twisting the handle less than a 1/4 turn.
Full visibility of the working area is afforded by the narrow, 180° swivel "C" head, making it easy to position the dies on the fitting. Gauge supplied with each die.
Hydraulic compression tool with a two stage section for use with interchangeable die sets, 1/4" to 1/2".
Includes
- Hydraulic Hand Swaging Tool
- Pastic carrying case
Features
- Head rotates 180° for difficult situations
- Dies sold separately with gauges included
To obtain the best possible performance Locoloc recommend:
- Keep the tool clean and free from dirt or metal particles, especially around the head, dies and ram of the tool
- Lubricate all moving parts regularly
- Keep all bolts tight
- Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil
