Ligno-Scanner SD Moisture Meter
Includes:
- Pouch
- (1) 9V battery
- Manual and laminated wood group chart
Lignomat’s Pinless Advantage:
- Quickly scan a large number of boards without leaving pinholes
- Dual depth pinless moisture meter – exclusive from Lignomat
- No effort is required to push pins into hardwood
- Pinless meters can read lower moisture values in hardwood than pin meters
All Ligno-Scanners give true wood moisture readings in percent using built-in corrections for different species. Corrections can also be programmed by entering the specific gravity between 0.3 and 1.0. Resolution is 0.1% for entire measuring range. HOLD function is available in all pinless meters from Lignomat.
Why choose a Scanner from Lignomat: Lignomat’s unique measuring technology assures calibration accuracy, reliability.
Ligno-Scanner SD dual depth moisture meter is calibrated for wood. The meter has 2 independent sets of calibrations, one for 1/4″ deep and one for 3/4″ deep. Standard pinless moisture meters have a fixed 3/4″ measuring depth.
Unique dual depth Ligno-Scanner SD works well for:
- Boards over 3/4″ and less than 3/4″ thick.
- Measuring layered engineered panels.
- Compare surface / core moisture to see if boards are dried evenly.
- Checking surface moisture after water damage or after applying
- waterborne finishes.
Pinless meters are essential when checking finished products such as floors, cabinet doors, table tops and ready-to-sell furniture, where pins would leave visible marks.
 | True dual-depth: Use up and down keys to measure the same spot 1/4″ deep and 3/4″ deep and compare. |  | Accurate, sturdy, small and handy with large display indicating: - Wood moisture percentage
- Wood species setting
- Measuring depth
|  | Hardwood flooring applications: From accepting a floor shipment to signing off a finished installation to inspecting a problem floor. |  | Woodworking and furniture making: Dual-depth allows measuring thicker and thinner boards with the correct measuring depth. |
