SAER, FC 25-2B, FC Series Electric Centrifugal Pump 3 HP, 230V, 60Hz, Max. Head 209 ft., GPM 39.6
Applications:
- Industrial water supply
- Pressurized water using pressure vessels (autoclaves)
- Various horticultural and agricultural irrigation applications
- Civil and domestic water transfer schemes
- Boiler, chiller and refrigeration systems
Installation:
Upon installation always prime the Pump Body before first start up. Pump may be installed with the motor shaft in the horizontal or vertical position. In the case of the pump being mounted in the vertical position the motor must be positioned above the pump body
Electric twin impeller close coupled centrifugal pumps is fitted with two opposing impellers housed in the pump body and located on the rotor shaft by means of keyways. The opposing impeller's functioning in series on the same motor shaft ensures that a perfect balance is achieved, thus avoiding overloading the motor bearings brought about by any hydraulic thrust loads. The liquid pumped is conveyed into the spiral shaped volute of the pump body, transforming the kinetic energy into dynamic pressure energy, with a further increase in kinetic energy as the liquid passes between the two impellers. Pressure and flow is achieved with minimum loss by means of the hydrodynamic closed impeller design.
