Buy Flowline GT10-1405-50, Thermo-Flo Gas Flow Switch, Long, 3/4" NPT

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Cord:: Cord: 50ft

Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Polypropylene-Ryton^® and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1-1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.

Features:

Rugged PP-Ryton or PVDF sensor for corrosive liquids and gases
Adjustable set point with LED for flow or no-flow status indication
60VA relay selectable NO or NC via power supply wiring polarity
Solid state sensor is not damaged by over-ranging flow velocities

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

Set point range	1 to 90 fps (0.3 to 27 mps)
Factory set point	10 fps (3 mps)
Repeatability	± 0.5% of set point at fixed temperature
Response time	1-10 seconds
Set point adjust	Potentiometer
LED indication	Flow status
Supply voltage	14-36 VDC
Consumption	70 mA maximum
Contact type	(1) SPST relay
Contact rating	60 VA, 1A maximum
Contact output	Selectable NO / NC
Process temp	32° to 140°
Ambient temp	-40° to 140°
Pressure	150 psi (10 bar) at 25º C, derated at 1.667 psi (0.113 bar) per ºC above 25º C
Sensor rating	NEMA 4X (IP65)
Wetted material	PP-Ryton
Cable jack. mat	PP
Cable type	4-conductor, shielded #22 AWG
Cable length	10' (3m)
Process mount	3/4” NPT (3/4” G/R)
Mount. gasket	Viton®
Classification	General purpose
Compliance	CE

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Set point range	1 to 90 fps (0.3 to 27 mps)
Factory set point	10 fps (3 mps)
Repeatability	± 0.5% of set point at fixed temperature
Response time	1-10 seconds
Set point adjust	Potentiometer
LED indication	Flow status
Supply voltage	14-36 VDC
Consumption	70 mA maximum
Contact type	(1) SPST relay
Contact rating	60 VA, 1A maximum
Contact output	Selectable NO / NC
Process temp	32° to 140°
Ambient temp	-40° to 140°
Pressure	150 psi (10 bar) at 25º C, derated at 1.667 psi (0.113 bar) per ºC above 25º C
Sensor rating	NEMA 4X (IP65)
Wetted material	PP-Ryton
Cable jack. mat	PP
Cable type	4-conductor, shielded #22 AWG
Cable length	10' (3m)
Process mount	3/4” NPT (3/4” G/R)
Mount. gasket	Viton®
Classification	General purpose
Compliance	CE

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Flowline GT10-1405-50 Thermo-Flo Gas Flow Switch, Long, 3/4" NPT

Identifiers

Technical Details

Reviews