BlackBox MT242A-F-UK G.703 75-120 Adapter (F) UK Use

Features

• Solve mismatches between coax and twisted-pair equipment.
• Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.
• Converts bidirectionally between G.703 balanced and unbalanced interfaces.
• Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.
• Features transformer isolation for protection against ground loops.
• 2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.

G.703 75–120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75 - 120 ohm Adapters to connect y G.703 network to y shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.Use the adapters to convert the balanced G.703 signals from y bridges and routers to unbalanced G.703 signals. So you can use y 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces. The G.703 75–120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120 ohm High-Speed Adapters support data rates to 8 Mbps.