Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)

AEMC 2121.15 C.A 773 Voltage Tester with Backlit Digital Display

  • Brand AEMC
  • Part # 2121.15
  • Model # C.A 773
  • Condition
    Brand New

Contact Us For Pricing

Availability
Contact Us
Check Availability
Quantity
Share:

An essential tool for electricians to ensure that voltage is not present before working on any electrical equipment or installation connected to the electrical system. Compliant with IEC 61243-3 Edition 2, the C.A 773 VAT can be used to work on any 1000V CAT IV installation. To meet the requirements of the standards in certain countries, these testers are available in two versions: equipped with IP2X test probes or without. The C.A 773 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50VAC / 120VDC.

Safety is ensured when testing GFCI and Residual Current Device (RCD) tripping by means of a double control system. Both hands are necessary to press the two buttons simultaneously. The integrated autotest checks the electrical circuits, power supply, displays and the condition of the measurement leads. Phase rotation measurement is simple and quick with the 2-wire microprocessor system. Audible and visual continuity testing is provided in compliance with Appendix B of the IEC 61243-3 standard. The tester can also detect stray voltages and offers unipolar phase identification

See more product information See less
Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Distributor

Technical Details

Resources
Reviews
Voltage Absence Testing (VAT)
Voltage Indication - LEDs12 to 1000Vac ; 12 to 1400Vdc
Voltage Indication - Display1 to 1000Vac ; 1 to 1400Vdc
Frequency RangeDC, 16.67 to 800Hz
Input Impedance>500kΩ
Max. Peak Current3.5mA RMS
Polarity IndicationYes
Redundant Hazardous Voltage IndicationThe ELV (Extra-Low Voltage) LED indicates that the voltage is higher than the SELV (Safety Extra-Low Voltage) with the rate at which it flashes proportional to the voltage level.
Stray Voltage DetectionYes (by low-impedance load switching)
RCD TrippingYes (by low-impedance load switching)
Phase/Neutral Identification>50V (45 to 65HZ) ; >150V (16.67 to 45Hz)
Continuity & Resistance
Buzzer Trigger Threshold100Ω typical (150Ω max.)
Extended Continuity Test (resistance)2kΩ, 60kΩ, 300kΩ
Test Current / Open-circuit Voltage≤ 1mA / ≤ 3.3V
Phase Rotation2-wire method with microprocessor
Ph/Ph Voltage50 to 1000Vac (45 to 400Hz)
General
BuzzerIntermittent beep for Voltage Detection,Continuous beep for Continuity
Cable Length3.3ft (1m)
DisplayLEDs + Backlit Digital Display
Power Supply2 x AA (LR6) Batteries (included)
Battery Life5000 ten second measurements approximately
Dimensions9.0 x 2.4 x 1.5” (228 x 60 x 39mm)
Weight (With Battery)12.4oz (350g) approximately
Operating Temperature/Humidity-22 to 140ËšF (-30 to +60ËšC) / 20 to 95% RH non-condensing
Storage Temperature/Humidity-40 to 158ËšF (-40 to +70ËšC) / 20 to 95% RH non-condensing
IP RatingIP 65
Electrical Safety1000V CAT IV per IEC 61010-1
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Voltage Absence Testing (VAT)
Voltage Indication - LEDs12 to 1000Vac ; 12 to 1400Vdc
Voltage Indication - Display1 to 1000Vac ; 1 to 1400Vdc
Frequency RangeDC, 16.67 to 800Hz
Input Impedance>500kΩ
Max. Peak Current3.5mA RMS
Polarity IndicationYes
Redundant Hazardous Voltage IndicationThe ELV (Extra-Low Voltage) LED indicates that the voltage is higher than the SELV (Safety Extra-Low Voltage) with the rate at which it flashes proportional to the voltage level.
Stray Voltage DetectionYes (by low-impedance load switching)
RCD TrippingYes (by low-impedance load switching)
Phase/Neutral Identification>50V (45 to 65HZ) ; >150V (16.67 to 45Hz)
Continuity & Resistance
Buzzer Trigger Threshold100Ω typical (150Ω max.)
Extended Continuity Test (resistance)2kΩ, 60kΩ, 300kΩ
Test Current / Open-circuit Voltage≤ 1mA / ≤ 3.3V
Phase Rotation2-wire method with microprocessor
Ph/Ph Voltage50 to 1000Vac (45 to 400Hz)
General
BuzzerIntermittent beep for Voltage Detection,Continuous beep for Continuity
Cable Length3.3ft (1m)
DisplayLEDs + Backlit Digital Display
Power Supply2 x AA (LR6) Batteries (included)
Battery Life5000 ten second measurements approximately
Dimensions9.0 x 2.4 x 1.5” (228 x 60 x 39mm)
Weight (With Battery)12.4oz (350g) approximately
Operating Temperature/Humidity-22 to 140ËšF (-30 to +60ËšC) / 20 to 95% RH non-condensing
Storage Temperature/Humidity-40 to 158ËšF (-40 to +70ËšC) / 20 to 95% RH non-condensing
IP RatingIP 65
Electrical Safety1000V CAT IV per IEC 61010-1
Resources for AEMC 2121.15

Resources for AEMC 2121.15

Related Articles

Most Searched Products

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)