Across IHG06A3 6.6 kW Hi-Frequency Induction Heater w/ Timers 600-1100 kHz

6.6 kW Hi-Frequency Induction Heater w/ Timers 600-1100 kHz

Features:

• Separated heater on a cable so it can be used by hand like a wand for added heating flexibility.
• Specially designed for heating and welding thin metal parts, blades and melting of small quantity of metallic powder, ultra fast.
• Light weight (only 45 Lb), portable (with built-in handle), instant heat and up to 90% energy savings
• Ease of use: just plug in the power and connect the water cooling system, our simple instruction allows you to use the heater in 15 minutes.
• Precise control with digital output, frequency and current displays.
• Remote foot switch for safer operation.
• Dual automatic and manual modes.
• Optional graphite and silica crucibles available. (melting material decides crucible type, weight and size of the material decide crucible size)
• ISO 9001:2008 registered manufacturer.

Safety:

• Overvoltage protection : machine shuts down when input voltage is over 245V. Overvoltage light will turn on and buzzer will sound continuously. Alarm and light shut off automatically when voltage goes below 245V.
• Overheat protection : if sensor detects heat radiator temperature is over 55°C, machine will shut down, overheat light will turn on and buzzer will sound continuously. Increase water pressure or lower water temperature until alarm goes off itself.
• Overcurrent/malfunction protections : machine will shut down, indicator light turned on and buzzer sounds continuously if one of these situations occurs:
  • One of the machine parts becomes overheated
  • Interfering signal detected
  • Short circuit between work pieces and induction coils
  • Machine malfunctions
  • Induction coils touching each other
  • Input voltage is too low
• Low water pressure protection : if water pressure goes below 29 PSI, machine will shut down, water protection light will turn on and buzzer will sound continuously.

Includes:

• IHG06A3 power supply (1 pc)
• Handheld flexible coil with bundled power and water hoses (6 feet) (1 Set)
• Induction coils (7" long) (3 pcs) 1) 3/4" ID single turn 2) 1/4" ID 2-turn 3) Saw teeth brazing coil
• Foot switch (7 ft) (1 pc)
• Stainless steel hose clamp (8 pcs)
• Fuse (5 pcs)
• Operation manual (1 pc)