Across IHG06A1 6.6 kW Hi-Frequency Compact Induction Heater w/ Timers 100-500 kHz

6.6 kW Hi-Frequency Compact Induction Heater w/ Timers 100-500 kHz

Features:

• Specially designed for welding thin metal parts, blades and melting of small quantity of metallic powder, ultra fast.
• Ease of use: just plug in the power and connect the cooling system. Our simple instruction allows you to use the heater in 15 minutes.
• Light weight (only 45 Lb), portable (with built-in handle), instant heat and up to 90% energy savings
• Precise control with digital output, frequency and current displays.
• Remote foot switch for a safer operation.
• Dual automatic and manual modes.
• Optional graphite, MgO and SiO₂crucibles available. (melting material decides crucible type, weight and size of the material decide crucible size)
• Frequency is non-adjustable, it depends on the coil design (diameter of turns, numbers of turns, copper tubing diameter and total length).
• ISO 9001:2008 registered manufacturer.

Safety:

• Overvoltage protection : machine shuts down, overvoltage light turns on and buzzer sounds continuously when line voltage exceeds 260V. Alarm shuts off automatically when voltage returns below 260V.
• Overheat protection : if sensor detects heat sink temperature is over 55°C, machine shuts down, overheat light turns on and buzzer sounds continuously. Decrease water temperature until alarm goes off.
• Overcurrent/malfunction protections : machine shuts down, indicator light turns on and buzzer sounds continuously in one of these situations:
  • Short circuit exists between work piece and induction coils
  • One of the machine parts becomes overheated
  • Interfering signal detected
  • Machine malfunctions
  • Induction coils touching each other
  • Line voltage is too low
• Low water pressure protection : if water pressure goes below 29 PSI, machine will shut down, water protection light will turn on and buzzer will sound continuously.

Includes:

• IHG06A1 induction heater (1 pc)
• Foot switch (7 ft) (1 pc)
• Induction coil (5mm diameter, 0.75" x1.25" x2" x9" IDxODxHxL) (2 pcs)
• Stainless steel hose clamp (8 pcs)
• Fuse (5 pcs)
• Induction coil adapter (to protect the coil connecters on the machine, good for users who change coils frequently) (2 pcs)
• Operation manual (1 pc)