On Flir Ex Series Cameras
The flask is fabricated with an ACE 45/50 joint and 100ml capacity. Head is fabricated with three 14/20 outer joints surrounding the 19/38 center opening. The Trubore bearing is 8038. The agitator is constructed as a solid shaft with the blades shaped in the form of a half propeller.
Blades are rounded to permit close tolerance with the flask bottom. The shaft is inserted in the bearing from underneath, rather than through the neck as in a conventional flask; design of the agitator is limited only by the joint dimensions. The analytical still head with stopcock serves as a reflux condenser.
Top joint is for thermometer or cold finger condenser. Controlled addition of liquids is done by graduated weighing buret used as a dropping funnel. Heating of assembly is done with a 9515 Glas-Col mantle with a 12080 voltage controller. Heater and controller not included. Thermometer not included. Use with 3/8-inch or 5/16-inch I.D. tubing, size C hose connection.
** This item is BRAND NEW – not refurbished.