STNT-KIT Includes Only:
SignalTEK 10G Display/Remote handsets Li-ion Battery (2) Hanging Strap (2) Quick Reference Guide Carry Case Power Supply (2) 2m Cat 6A shielded patch cables (2) R180001 - Amplifier Probe for Data Cable Tracing 2 x MGKLX2 - GbE Fiber Kit LX 2 x MGKSX1 - GbE Fiber Kit SX Increase your network speed from 1Gb/s to 10Gb/s
Problem
There are 111 billion meters of Cat5e/Cat6 cabling installed globally that is limited to 1Gb/s bandwidth speeds due to the current switches deployed.
Upgrading to Multi-Gigabit switches could increase speed but it is unclear what bandwidth the existing cabling will support.
Solution
Use SignalTEK 10G to verify what the data cabling will support (up to 10Gb/s) before spending money on new Multi-Gigabit switches delivering 2.5/5/10Gb/s speeds. Use the SignalTEK 10G again following the upgrade to prove performance to the client with the "proof of performance" PDF reports.
Fiber Testing
Verify fiber link speed to 1G or 10G, measure optical power and data throughput.
Validate Fiber Link Speed
The fiber link speed test confirms the connection is 1G or 10G which can be affected by cable length or signal loss.
Troubleshoot Fiber Cable Issues
The Tx & Rx optical power measurement is compared to the expected power level to determine attenuation in a fiber link. This indicates if the connector is dirty or damaged which is the number one cause of failure.
Easy to understand traffic light status
The simple traffic light indicator displays Good, Marginal or Poor power level based on IEEE 802.3 1G/10G limits.
Max throughput test
The SignalTEK 10G will prove the maximum available bandwidth over the fiber link up to 10Gb/s.
Discover a faulty SFP
The SFP temperature is measured to help understand if it has become faulty.
The SignalTEK 10G will help to increase network bandwidth without replacing expensive cable infrastructure, troubleshoot PoE and Ethernet issues and prove the maximum bandwidth up to 10 Gigabits per second.
72-hour event log captures network events down to the second eliminating guesswork
SignalTEK 10G logs all network events over a 72-hour period to help diagnose connectivity issues faster, reducing hours onsite and reducing trips to the site. Leave the tester onsite, connect remotely to monitor network activity, view the event log and control all functions of the tester from the office.
The SignalTEK 10G eliminates guesswork when installing, maintaining and troubleshooting where PoE is deployed up to 90W (PoE++).
No more trial and error
Accurately measure the maximum power available
Supports PoE up to 90W (PoE++)
Test all PoE Classes (0-8) and Types (af/at/bt)
Identifies the powered pairs
Determine whether power is from a switch or midspan injector
Verify the PoE installation
Pass / Fail indication to IEEE standards
Extended power test
Some switches may provide power exceeding their IEEE Class rating. Measure the maximum available power up to 90 watts.
The AnyWare Cloud management system allows real time collaboration between Project Managers and Field Technicians. There is no need for Field Technicians to setup the SignalTEK 10G, Project Managers pre-configure the jobs and tests in the AnyWare Cloud, eliminating potential mistakes and compressing the time taken to prepare reports for customers.
VIDEO
