Save $20
on any order of $599+
Save $30
on any order of $999+
Save $50
on any order of $1499+
View All Coupon Codes
This item qualifies for Free Ground...
Standard Pressure Dewpoint Probe
The probe was developed in cooperation with a world market leader in the compressed air engineering sector. The standard probe 0636.9835 is sufficient for most measurements in compressed-air piping (e.g. refrigeration dryers in the range from 0 to 2 °C tpd).
The pressure dew point tpd is the temperature at which compressed air reaches the saturation state (100% RH). This value is an important criteria for the perfect running of the compressed air plant. The probe is connected to the compressed air system via a standard plug-in connector (G1/4” internal thread to ISO 228-1) or via a screw-on adapter for measurements at test points. If required other standard plug-in connectors with thread G 1/4” can be screwed into measuring chamber. The sensor is positioned in the flow of compressed air being measured, for the duration of the measurement. The probes can be used, without a measuring chamber, in accordance with the Instruction Manual for the testo x35 instruments. By connecting the probe to testo x35 the user has a portable, mains independent measuring system. The large display enables the display of the relative humidity or the dew point with the temperature.
We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.
* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).
Note: Please read description carefully. Do not base your order on the picture presented.