| Pressure |
| Pressure valves | 2 valves |
| Measuring range | From -1 to 60 bar (-14 to 870 psi) |
| Pressure sensing accuracy* | ±0.5% of full scale |
| Available units | psi, MPa, kPa, bar, Foot of head |
| Resolution | 0.1 psi, 0.001 MPa, 1 kPa, 0.01 bar, 1 foot of head |
| Overload | 65 bar (943 psi) |
| Burst pressure | 150 bar (2175 psi) |
| Operating temperature (handle) | From -20 to 50°C (-4 to 122°F) |
| Storage temperature (handle) | From -20 to 60°C (-4 to 140°F) |
| Temperature |
| Number of probe | 2 clamp probes |
| Temperature sensors | High accuracy NTC thermistors |
| Temperature sensor range** | From -40 to 150°C (-40 to 302°F) |
| Temperature accuracy* | ±1.3°C (±2.4°F)*** |
| Maximum operating temperatures | Jaws: 150°C (302°F) - Cable: 105°C (221°F) - Handle: 90°C (194°F) |
| Available units | °C, °F, K |
| Resolution | 0.1°C, 0.1°F, 0.1 K |
| Pipes diameter | From 6 to 42 mm (0.2'' to 1.7'') |
| Cable | 2 m (6 ft) length with strengthened 3-point Jack connector, 03.2 mm, in PVC, max. temperature 105°C (221°F) |
| Operating temperature | From -20 to 50°C (-4 to 122°F) |
| Storage temperature | From -20 to 60°C (-4 to 140°F) |
| Device |
| Environmental conditions of use | Hygrometry: in non-condensing condition (<80% RH) Maximum altitude: 2000 m (6561') Non-corrosive or combustible gases |
| Battery life | 250 h (for one measurement every seconds at 20°C / 68°F) |
| Wireless connection | Class 1 BLE 4.2 |
| Wireless connection range | Up to 30 m (98 ft) - Depending on smartphone and tablet wireless connection radio strength. |
| Superheat and subcooling | Automatically calculated by the Manifold app |
| Refrigerant database | 126 refrigerant gases. Measurable products: CFC, HFC, HCFC, N, CO2, H20 (see the complete list on the user manual) |
| Connections | To installation: female FFL with Schrader® depressor To flexible: male W MFL with Schrader® valve |
| Standards | 2011/65/EU RoHS II; 2012/19/EU WEEE; 2014/30/EU EMC; 2014/53/EU RED |
- * All accuracies specified in this document were conducted under laboratory conditions & can be guaranteed for measurement carried out in the same conditions, or carried out with calibration compensation.
- ** The temperature concerns the sensors operating range, do not use the handle or cables outside the indicated temperature.
- *** The temperature accuracy is given for the -20 to 80°C / -4 to 176°F range.
|
