PR electronics 9116A2 Universal Converter, 21.4 VDC

PR electronics, 9116A2, Universal converter

Features

• Input for RTD, TC, Ohm, potentiometer, mA and V
• Supply for 2-wire transmitters
• Active / passive mA output and relay output
• Can be supplied separately or installed on power rail, PR type 9400
• SIL 2-certified via Full Assessment
• Configuration and monitoring by way of detachable display front (PR 4511/4501); process calibration, signal and relay simulation.
• Advanced relay configuration, e.g. setpoint, window, delay, sensor error indication and power monitoring.
• Copying of the configuration from one device to others of the same type via the display front.
• TC inputs with internal CJC or external CJC for higher accuracy.
• Active / passive mA output via the same two terminals.

Application

• The device can be mounted in and receive signals from non-classified area and zone 2.
• Conversion and scaling of temperature, voltage, potentiometer and linear resistance signals.
• Power supply and signal isolator for 2-wire transmitters.
• Monitoring of error events and cable breakage via the individual status relay and/or a collective electronic signal via the power rail.
• 9116A has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.

Characteristics

• 1 green and 1 red front LED indicate operation status and malfunction. 1 yellow LED indicates relay status.
• 2.6 kVAC galvanic isolation between input, output and supply.

Mounting

• The devices can be mounted vertically or horizontally without distance between neighbouring units.