Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)

PR electronics 7501B2B1N22 Field Mounted HART Temperature Transmitter

Conduit Thread: M20x1.5 6H, Transmitter: No, Approvals: Hazardous Area
  • Condition
    Brand New
Availability
Typically In Stock
Check Availability
Quantity
Share:

Options and Related Products

Conduit Thread:
Conduit Thread: M20x1.5 6H
Transmitter:
Transmitter: No
Approvals:
Approvals: Hazardous Area

PR electronics, 7501B2B1N22, Field Mounted HART Temperature Transmitter, 316 Stainless Steel, Display, -20 to 85 Degree FKM Rubber, M20x1/5 6H, Hazardous Area

Features

  • RTD, TC, Ohm, and bipolar mV input and analog output
  • HART 7 functionality with HART 5 compatibility

High definition display

  • 0, 90, 180, & 270 degree position adjustments.
  • Monitoring, programming and diagnostics view.
  • Extensive diagnostics with flashing red or white back light
  • Supports 7 languages

Local operator interface (LOI)

  • 3 optical buttons; up, down and enter.
  • Dynamically adaptive to wear or accumulation of dirt.
  • Immune to interference from ambient light sources.
  • Useable with or without gloves.

Configuration

  • From the LOI through PR guided menu.
  • PReset and HART modem.
  • HHC, DCS or AMS via HART.

Mounting / installation

  • For installation in zone 0, 1, 2 and zone 20, 21, 22 and in Class 1, Division 1 and 2 applications.
  • Hardware assessed for use in SIL 2 applications.
  • Mounting on 1.5”–2” pipe bracket or on wall / bulkhead.

Application

  • Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100.
  • HART communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors.
  • Conversion of linear resistance to a standard analog current signal, e.g from valves or Ohmic level sensors.
  • Amplification of bipolar mV signals to standard 4...20 mA current signals.
  • Up to 63 transmitters (HART 7) can be connected in a multidrop communication setup.
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Reseller

Technical Details

Reviews
Operating temperature-40°C to +85°C (with silicone O-ring)
Operating temperature-20°C to +85°C (with FKM Oring)
Storage temperature-40°C to +85°C
Calibration temperature20...28°C
Relative humidity0...100% RH (condensing)
Protection degreeIP54 / IP66 / IP68 / type 4X
DimensionsØ 110 mm
Weight approx., aluminum / stainless steel1.3 / 2.8 kg
Wire size0.13 x1.5 mm2 / AWG 26...16 stranded wire
Screw terminal torque0.4 Nm
VibrationIEC 60068-2-6
2...25 Hz±1.6 mm
25...100 Hz±4 g
Number of digits5
back lightSelectable ON/OFF
back light colorSelectable white or red
Supply voltage, DC: Ex ia, intrinsically safe10 (12 - with back light)...30 VDC
Supply voltage, DC: Other10 (12 - with back light)...35 VDC
Isolation voltage, test / working1.5 kVAC / 50 VAC
Response time (programmable)1...60 s
Signal / noise ratio> 60 dB
ProgrammingHART
Start-up time, transmitter to displayMax. 5 s
Long-term stability, better than±0.1% of span / year
AccuracyBetter than 0.05% of selected range
Signal dynamics, input22 bit
Signal dynamics, output16 bit
EMC immunity influence< ±0.1% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< ±1% of span
Max. offset50% of selected max. value
RTD typePt50/100/200/500/1000; Ni50/100/120/1000
Cable resistance per wire5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)
Sensor currentNom. 0.2 mA
Linear resistance min....max0 Ω...7000 Ω
Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC)Constant, internal or external via a Pt100 or Ni100 sensor
Measurement range-800...+800 mV
Min. measurement range (span)2.5 mV
Input resistance10 MΩ
Signal range4…20 mA
Min. signal range16 mA
Load (at current output)≤ (Vsupply - 10) / 0.023 [Ω]
Load resistance, with back light≤ (Vsupply - 12) / 0.023 [Ω]
Sensor error indicationProgrammable 3.5…23 mA
NAMUR NE43 Upscale/Downscale23 mA / 3.5 mA
Updating time440 ms
HART protocol revisionsHART 7 and HART 5
EMC2014/30/EU
EACTR-CU 020/2011
EU RO Mutual Recognition Type ApprovalMRA0000009
ATEX 2014/34/EUDEKRA 15 ATEX 0058 X
IECExIECEx DEK 15.0039 X
FMFM16US0009X / FM16CA0010X
CSA70024231
EAC Ex TR-CU 012/2011RU C-DK.GB08.V.01316
INMETRODEKRA 15.0014 X
NEPSIGYJ15.1336X, GYJ15.1337X and GYJ15.1338X
SILHardware assessed for use in SIL applications
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Operating temperature-40°C to +85°C (with silicone O-ring)
Operating temperature-20°C to +85°C (with FKM Oring)
Storage temperature-40°C to +85°C
Calibration temperature20...28°C
Relative humidity0...100% RH (condensing)
Protection degreeIP54 / IP66 / IP68 / type 4X
DimensionsØ 110 mm
Weight approx., aluminum / stainless steel1.3 / 2.8 kg
Wire size0.13 x1.5 mm2 / AWG 26...16 stranded wire
Screw terminal torque0.4 Nm
VibrationIEC 60068-2-6
2...25 Hz±1.6 mm
25...100 Hz±4 g
Number of digits5
back lightSelectable ON/OFF
back light colorSelectable white or red
Supply voltage, DC: Ex ia, intrinsically safe10 (12 - with back light)...30 VDC
Supply voltage, DC: Other10 (12 - with back light)...35 VDC
Isolation voltage, test / working1.5 kVAC / 50 VAC
Response time (programmable)1...60 s
Signal / noise ratio> 60 dB
ProgrammingHART
Start-up time, transmitter to displayMax. 5 s
Long-term stability, better than±0.1% of span / year
AccuracyBetter than 0.05% of selected range
Signal dynamics, input22 bit
Signal dynamics, output16 bit
EMC immunity influence< ±0.1% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< ±1% of span
Max. offset50% of selected max. value
RTD typePt50/100/200/500/1000; Ni50/100/120/1000
Cable resistance per wire5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)
Sensor currentNom. 0.2 mA
Linear resistance min....max0 Ω...7000 Ω
Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC)Constant, internal or external via a Pt100 or Ni100 sensor
Measurement range-800...+800 mV
Min. measurement range (span)2.5 mV
Input resistance10 MΩ
Signal range4…20 mA
Min. signal range16 mA
Load (at current output)≤ (Vsupply - 10) / 0.023 [Ω]
Load resistance, with back light≤ (Vsupply - 12) / 0.023 [Ω]
Sensor error indicationProgrammable 3.5…23 mA
NAMUR NE43 Upscale/Downscale23 mA / 3.5 mA
Updating time440 ms
HART protocol revisionsHART 7 and HART 5
EMC2014/30/EU
EACTR-CU 020/2011
EU RO Mutual Recognition Type ApprovalMRA0000009
ATEX 2014/34/EUDEKRA 15 ATEX 0058 X
IECExIECEx DEK 15.0039 X
FMFM16US0009X / FM16CA0010X
CSA70024231
EAC Ex TR-CU 012/2011RU C-DK.GB08.V.01316
INMETRODEKRA 15.0014 X
NEPSIGYJ15.1336X, GYJ15.1337X and GYJ15.1338X
SILHardware assessed for use in SIL applications
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)