Operating temperature | -20°C to +60°C |
Calibration temperature | 20…28°C |
Relative humidity | < 95% RH (non-cond.) |
Protection degree | IP20 |
Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
Dimensions (HxWxD) w/ 4501 / 4511 | 109 x 23.5 x 116 / 131 mm |
Weight approx. | 170 g |
Weight incl. 4501 / 4511 (approx.) | 185 g / 270 g |
Wire size | 1 x 2.5 mm2 stranded wire |
Screw terminal torque | 0.5 Nm |
Vibration | IEC 60068-2-6 |
2…13.2 Hz | ±1 mm |
13.2…100 Hz | ±0.7 g |
Supply voltage, universal | 21.6…253 VAC, 50…60 Hz or 19.2…300 VDC |
Max. required power | ≤ 2.0 W |
Isolation voltage, test / working | 2.3 kVAC / 250 VAC |
Temperature input (0…90%, 100…10%) | ≤ 1 s |
mA / V input (0…90%, 100…10%) | ≤ 400 ms |
2-w. supply (term. 44…43) | 25…16 VDC / 0…20 mA |
Fuse | 400 mA SB / 250 VAC |
Programming | Communication enabler 4511 / Programming front 4501 |
Signal / noise ratio | Min. 60 dB (0…100 kHz) |
Accuracy | Better than 0.1% of selected range |
EMC immunity influence | < ±0.5% of span |
Extended EMC immunity: NAMUR NE 21, A criterion, burst | < ±1% of span |
RTD type | Pt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100 |
Cable resistance per wire (max.) | 50 Ω |
Sensor current | Nom. 0.2 mA |
Effect of sensor cable resistance (3-/4-wire) | < 0.002 Ω / Ω |
Sensor error detection | Yes |
Short circuit detection | < 15 Ω |
Linear resistance min….max. | 0 Ω…10000 Ω |
Potentiometer min….max. | 10 Ω…100 kΩ |
Thermocouple type | B, E, J, K, L, N, R, S, T, U, W3, W5, LR |
Cold junction compensation (CJC) via ext. sensor in connector 5910 | 20…28°C ≤ ±1°C, -20…20°C / 28…70°C ≤ 2°C |
CJC via internally mounted sensor | ±(2.0°C + 0.4°C * Δt) |
Δt = | Internal temperature-ambient temperature |
Sensor error detection | Yes |
Sensor error current: When detecting / else | Nom. 2 μA / 0 μA |
Measurement range | 0…20 mA |
Programmable measurement ranges | 0…20 and 4…20 mA |
Input resistance | Nom. 20 Ω + PTC 50 Ω |
Measurement range | 0…12 VDC |
Programmable measurement ranges | 0/0.2…1, 0/1…5, 0/2…10 VDC |
Input resistance | Nom. 10 MΩ |
Relay functions | Setpoint, Window, Sensor error, Latch, Power and Off |
Hysteresis | 0…100% |
ON and OFF delay | 0…3600 s |
Max. voltage | 250 VRMS |
Max. current | 2 AAC or 1 ADC |
Max. AC power | 500 VA |
Sensor error reaction | Break / Make / Hold |
*of span | = of the currently selected measurement range |
EMC | 2014/30/EU |
LVD | 2014/35/EU |
FM | 3025177 |
UL | UL 508 |
EAC | TR-CU 020/2011 |
DNV-GL Marine | Stand. f. Certific. No. 2.4 |
EU RO Mutual Recognition Type Approval | MRA000000Z |