Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)

PR electronics 3101 TC Converter, 113 x 6.1 x 115 mm

Type: TC Converter
  • Condition
    Brand New
Availability
Typically In Stock
Check Availability
Quantity
Share:

Options and Related Products

Type:
Type: TC Converter

PR electronics, 3101, TC Converter, 113 x 6.1 x 115 mm

Features:

  • High accuracy, better than 0.1% of span
  • Slimline housing of 6 mm
  • Excellent EMC performance and 50/60 Hz noise suppression
  • Selectable < 30 ms / 300 ms response time
  • Pre-calibrated temperature ranges selectable via DIP-switches

Application:

  • The 3101 temperature converter measures standard TC J and K temperature sensors, and provides an analog voltage or current output.
  • The 3101 can be mounted in the safe area or in Zone 2 / Division 2 areas.
  • Approved for marine applications.

Characteristics:

  • Flexibly powered by 24 VDC (±30%) via connectors.
  • < 30 ms fast response time with simultaneous sensor error detection when selected.
  • Selectable 300 ms response time when signal dampening is needed.
  • High conversion accuracy in all ranges, better than 0.1% of span.
  • Meeting the NAMUR NE21 recommendations, the 3101 provides top measurement performance in harsh EMC environments.
  • The device meets the NAMUR NE43 standard defining out of range and sensor error output values.
  • A visible green LED indicates operational status of the unit and the input sensor.
  • All terminals are protected against overvoltage and polarity error.
  • Excellent signal/noise ratio of > 60 dB.

Mounting / installation / programming

  • Selectable DIP-settings for easy configuration of more than 1000 factory calibrated measurement ranges.
  • The narrow 6 mm housing allows up to 165 units to be mounted per meter of DIN rail, without any air gap between units.
  • Wide ambient temperature range of -25...+70C.
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Reseller

Technical Details

Reviews
Environmental Conditions
Operating temperature-25°C to +70°C
Storage temperature-40°C to +85°C
Calibration temperature20...28°C
Relative humidity< 95% RH (non-cond.)
Protection degreeIP20
Installation inPollution degree 2 & meas. / overvoltage cat. II
Mechanical specifications
Dimensions (HxWxD)113 x 6.1 x 115 mm
Weight approx.70 g
DIN rail typeDIN EN 60715/35 mm
Wire size0.13...2.5 mm2 / AWG 26...12 stranded wire
Screw terminal torque0.5 Nm
VibrationIEC 60068-2-6
2...25 Hz±1.6 mm
25...100 Hz±4 g
Supply voltage16.8...31.2 VDC
Max. required power0.52 W
Max. power dissipation0.52 W
Response time
Response time (0...90%, 100...10%)< 30 ms / 300 ms (selectable)
Signal / noise ratioMin. 60 dB
ProgrammingDIP-switches
Signal dynamics, input23 bit
Signal dynamics, output18 bit
AccuracyBetter than 0.1% of sel. range
EMC immunity influence< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< ±1% of span
Incorrect DIP-switch setting identification0 V / 0 mA output; LED 0.5 s / 1 Hz
Input specifications< ±0.5% of span
TC input< ±1% of span
Temperature range, TC J-100...+1200°C
Temperature range, TC K-180...+1372°C
Min. measurement range (span) - TC J & K50°C
Accuracy: the greater ofBetter than 0.1% of span or 1°C
Temperature coefficient: the greater of0.1°C/°C or ≤ ±0.01%/°C
Sensor cable resistance< 5 kΩ per wire
Cold junction compensation (CJC): Accuracy at internal CJCBetter than ±2.5°C
Internal CJC error detectionYes
Open Thermocouple detectionYes - selectable via DIP-switch
Output specifications< 0.002 Ω / Ω
Common output specificationsYes - selectable via DIP-switch
Updating time10 ms
Current output< 18 Ω
Signal range0...23 mA
Programmable signal ranges0 / 4...20 mA
Sensor error indication (0...20 mA)0 mA or 23 mA / OFF
Sensor error indication (4...20 mA)3.5 mA or 23 mA / acc. to NAMUR NE43 or OFF
Load ( at current output)≤ 600 Ω
Load stability≤ 0.01% of span / 100 Ω
Current limitation at low output load< 60 mA peak / < 4 mA average
Voltage output3.5 mA or 23 mA / acc. to NAMUR NE43 or OFF
Programmable signal ranges0/1...5 and 0/2...10 V
Sensor error indication0 V / 10% above the max. / none
Load ( at voltage output)≥ 10 kΩ
Open output< 18 V
I.S. / Ex marking0/1...5 and 0/2...10 V
ATEXII 3 G Ex ec IIC T4 Gc
IECExEx ec IIC T4 Gc
FM, USCl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
FM, CACl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, Ex nA IIC T4
EAC Ex2Ex nA IIC T4 Gc X
Observed authority requirementsCl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
EMC2014/30/EU
LVD2014/35/EU
ATEX2014/34/EU
RoHS2011/65/EU
EACTR-CU 020/2011
EAC ExTR-CU 012/2011
Approvals2011/65/EU
ATEXKEMA 10ATEX0147 X
IECExKEM 10.0068X
c FM usFM17US0004X / FM17CA0003X
c UL us, UL 61010-1E314307
EAC ExRU C-DK.HA65.B.00355/19
DNV MarineTAA00001RW
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Environmental Conditions
Operating temperature-25°C to +70°C
Storage temperature-40°C to +85°C
Calibration temperature20...28°C
Relative humidity< 95% RH (non-cond.)
Protection degreeIP20
Installation inPollution degree 2 & meas. / overvoltage cat. II
Mechanical specifications
Dimensions (HxWxD)113 x 6.1 x 115 mm
Weight approx.70 g
DIN rail typeDIN EN 60715/35 mm
Wire size0.13...2.5 mm2 / AWG 26...12 stranded wire
Screw terminal torque0.5 Nm
VibrationIEC 60068-2-6
2...25 Hz±1.6 mm
25...100 Hz±4 g
Supply voltage16.8...31.2 VDC
Max. required power0.52 W
Max. power dissipation0.52 W
Response time
Response time (0...90%, 100...10%)< 30 ms / 300 ms (selectable)
Signal / noise ratioMin. 60 dB
ProgrammingDIP-switches
Signal dynamics, input23 bit
Signal dynamics, output18 bit
AccuracyBetter than 0.1% of sel. range
EMC immunity influence< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< ±1% of span
Incorrect DIP-switch setting identification0 V / 0 mA output; LED 0.5 s / 1 Hz
Input specifications< ±0.5% of span
TC input< ±1% of span
Temperature range, TC J-100...+1200°C
Temperature range, TC K-180...+1372°C
Min. measurement range (span) - TC J & K50°C
Accuracy: the greater ofBetter than 0.1% of span or 1°C
Temperature coefficient: the greater of0.1°C/°C or ≤ ±0.01%/°C
Sensor cable resistance< 5 kΩ per wire
Cold junction compensation (CJC): Accuracy at internal CJCBetter than ±2.5°C
Internal CJC error detectionYes
Open Thermocouple detectionYes - selectable via DIP-switch
Output specifications< 0.002 Ω / Ω
Common output specificationsYes - selectable via DIP-switch
Updating time10 ms
Current output< 18 Ω
Signal range0...23 mA
Programmable signal ranges0 / 4...20 mA
Sensor error indication (0...20 mA)0 mA or 23 mA / OFF
Sensor error indication (4...20 mA)3.5 mA or 23 mA / acc. to NAMUR NE43 or OFF
Load ( at current output)≤ 600 Ω
Load stability≤ 0.01% of span / 100 Ω
Current limitation at low output load< 60 mA peak / < 4 mA average
Voltage output3.5 mA or 23 mA / acc. to NAMUR NE43 or OFF
Programmable signal ranges0/1...5 and 0/2...10 V
Sensor error indication0 V / 10% above the max. / none
Load ( at voltage output)≥ 10 kΩ
Open output< 18 V
I.S. / Ex marking0/1...5 and 0/2...10 V
ATEXII 3 G Ex ec IIC T4 Gc
IECExEx ec IIC T4 Gc
FM, USCl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
FM, CACl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, Ex nA IIC T4
EAC Ex2Ex nA IIC T4 Gc X
Observed authority requirementsCl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
EMC2014/30/EU
LVD2014/35/EU
ATEX2014/34/EU
RoHS2011/65/EU
EACTR-CU 020/2011
EAC ExTR-CU 012/2011
Approvals2011/65/EU
ATEXKEMA 10ATEX0147 X
IECExKEM 10.0068X
c FM usFM17US0004X / FM17CA0003X
c UL us, UL 61010-1E314307
EAC ExRU C-DK.HA65.B.00355/19
DNV MarineTAA00001RW
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)