Monarch Instrument 5396-1106 Track-It Temperature Logger with NIST

Monarch Instrument, 5396-1106, Track-It Extreme Temperature Logger, 22" Bendable Probe with NIST Certificate

Includes:

• Data Logger
• Battery
• USB Interface Cable
• Track-It Download Software

Features:

• Up to 30,000 samples per record
• Alarm set points allows graphical visualization of excursions
• Compact size allows for easy placement in any application
• 21 CFR Part 11 compliant software
• 9 point N.I.S.T. certificate
• -58 to 302 deg. F (-50 to 150 deg. C) temp range
• Extended range for probe tip: -70 to 300 deg. C
• 0.1 deg. C accuracy and excellent repeatability
• Accurate internal clock (1 minute / year)
• MKT calculation over an entire data file or selected time intervals
• Flexible and fixed probes
• Simple setup and deployment
• RTD technology provides superior accuracy over wide temperature rang
• Logger requires USB Reader for PC

Typical Uses:

• Validation
• Medical Device Sterilization
• Steam Heat Sterilization
• Autoclave Sterilization
• Ovens / Chambers
• Refrigerators / Freezers
• HACCP Implementation
• Pasteurization
• Food and Beverage Processing
• Uniformity Mapping
• Pharmaceutical Processing
• Storage

The Track-It Extreme Temperature Data Loggers are battery powered stand alone data loggers that record up to 30,000 samples of temperature data. The units are easily configured using the included Track-It Software. Simply plug the logger into the Extreme Logger Reader (required additional item) which connects via a standard USB cable to any open USB port on your PC and the Track-It Software automatically identifies the logger. The Logger communicates via the Extreme Logger Reader without opening the logger so long term integrity of the housing is ensured. The Track-It Extreme Temperature Logger housing is made of 316L Stainless Steel and meets IP68 rating standards. Set the unit up to start or stop recording immediately, at a predetermined time and date or only at certain temperature values. The sample storage rate can be set from 1 sample every 2 seconds up to 1 sample every 24 hours. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery.