Buy Meriam M400-CI0300-02, M4 Series Precision Calibrator Data Logger

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Pressure Manifold Porting:: Pressure Manifold Porting: Standard 2 port manifold for all Types
Range:: Range: -15 TO +300 PSI Compound

-15 TO +300 PSI Compound, Isolated Standard 2 port manifold for all Types

In continuous production for nearly 25 years, the MeriCal™ digital Pressure transmitter calibrator is one of the most successful instruments to ever serve the process industries. Meriam's NEW M4 Series Handheld Precision Calibrator / Data Logger builds on this reputation with an impressive array of new features, functions and improved accuracy specification! The M400 includes one Pressure sensor and one mA/V instrument. Chose from differential, gauge, compound or absolute Pressure types and ranges from 10" H2O to 3000 PSIG full scale. Need two ranges for wider utility? No problem!

All M4 Series handhelds provide convenient electrical signal measurement and sourcing. Measure +/-50V or +/-100mA, source 24VDC and measure mA, sink V or mA, or source precise VDC or mA DC values using the supplied test leads. Accuracy is +/-(0.015% of Reading + 0.002 units) over the entire operating temperature range. Source or sink values are easily entered using the Adaptive Interface Wheel.

Data Logging is standard on all M4 models. Select Data Logging from the Setup key menu and then enter the desired Interval and Duration parameters using the keypad controls. For M400 single Pressure sensor units, Pressure, VDC and mA DC values are saved to the SD card at each interval. M402 dual Pressure sensor units log both Pressure values plus VDC and mA DC values. The supplied SD card is located under the battery compartment cover. Data can be moved to a host PC using the supplied USB cable and PC utility or by inserting the SD card in a compatible PC to copy the desired files. The M4 handhelds and SD card supports 100 data files.

DC voltage and current measurement: Connections to transmitters or transducers under test are made using the 1/8" banana jacks located in the lower end of the handheld. Alternatively, these jacks can provide temporary 24V DC power and measure loop current simultaneously. Sourcing DC volts and current is also a standard feature. Use the Sensor key to highlight the sensor desired and then use the Setup key to select the desired function. The Adaptive Interface Wheel is used to set precise values or configure step or ramp sourcing programs (step and ramp are pending) to test receiving devices.

See more product information See less

Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Accuracy	±0.025% of Reading from 10 - 100% FS, ±0.002% of Full Scale under 10% of F
Temperature Performance	Accuracy includes all affects of temperature from -20° to +50° C (-4° to +122° F)
Resolution	select Accurate digits Right Of Decimal (AROD) or Precision digits Right Of Decimal (PROD)
Engineering Units	32 user selectable Pressure: units
Pressure: Limit DN sensors	2x range when pressurized on P1 (HI) side only, 150 PSI when applied simultaneously to P1 (HI) and P2 (LO) sides
Pressure: Limit DI sensors	3x range when pressurized on P1 (HI) side only, 3x range or 150 PSI (whichever is less) on P2 (LO) side only 1000 PSI when applied simultaneously to P1 (HI) and P2(LO) sides
Pressure: Limit GI, CI, AI sensors	2x range
Media Compatibilit DN sensors	Non-isolated for clean, dry, non-corrosive gases only (Brass, 316L ss, Silicon gel)
Media Compatibilit DI sensors	Isolated for fluids compatible with 316L ss and Viton GI, CI, AI sensors: Isolated for fluids compatible with 316L ss
Voltage & Current, Measurement, Sourcing, Sinkin
DC Voltage	±50 VDC measure, 0 - 24 VDC source
DC Current	±100 mA DC measure, 0 - 24 mA DC source, 1 - 24 mA sink at 3-50 VDC external power
Accuracy	±(0.015% of Reading +0.002 units)
Temperature Performance	Accuracy includes all affects of temperature from -20° to +50° C (-4° to +122° F)
Loop Power	250Ω HART® resistor included 24 VDC @ 4mA, 18.5 VDC @ 20mA Four (4) AA alkaline batteries power a transmitter at 20 mA output for 10 hours
Temperature
Operating	-4 to 122°F (-20 to 50°C)
Storage	-40 to 140°F (-40 to 60°C)
Connections
Pressure:	1/8" NPT (female)
Electrical	Standard banana jacks on 3/4" centers Firmware updates, data retrieval: USB mini-B (female)
Power
Portable service	Four (4) AA alkaline batteries provides 30+ hours of continuous measurement service
Operation with PC	Power over USB using USB type A to mini-B cable (requires high power 500 mA port)
Display	128 x 128 pixel (2" x 2" viewable) monochrome display with backlight
Keypad	Sealed membrane keypad with molded dome switches and integrated Adaptive Interface Wheel
Enclosure	8.5" L x 3.75" W (max.) x 2.25" D (max.), polycarbonate case, Softflex® over-molded bumpers, IP40
Weight	M400 single sensor: 1.5 - 1.8 lbs, M402 dual sensor: 1.8 lbs
Firmware Features	Sensor Zero, Sensor Damping, Averaging (pending), Minimum/Maximum capture, Tare (pending), Units Select, Data Logging, Data Logging Record Indicator, Selectable Off Timer, Selectable Backlight Timer, Adjustable Contrast, Adjustable Backlight Brightness, Battery Monitor
Field Recalibration	All sensors can be recalibration in the field using suitable reference standards. M4 Series products may also be returned to Meriam for factory recertification / recalibration service

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Accuracy	±0.025% of Reading from 10 - 100% FS, ±0.002% of Full Scale under 10% of F
Temperature Performance	Accuracy includes all affects of temperature from -20° to +50° C (-4° to +122° F)
Resolution	select Accurate digits Right Of Decimal (AROD) or Precision digits Right Of Decimal (PROD)
Engineering Units	32 user selectable Pressure: units
Pressure: Limit DN sensors	2x range when pressurized on P1 (HI) side only, 150 PSI when applied simultaneously to P1 (HI) and P2 (LO) sides
Pressure: Limit DI sensors	3x range when pressurized on P1 (HI) side only, 3x range or 150 PSI (whichever is less) on P2 (LO) side only 1000 PSI when applied simultaneously to P1 (HI) and P2(LO) sides
Pressure: Limit GI, CI, AI sensors	2x range
Media Compatibilit DN sensors	Non-isolated for clean, dry, non-corrosive gases only (Brass, 316L ss, Silicon gel)
Media Compatibilit DI sensors	Isolated for fluids compatible with 316L ss and Viton GI, CI, AI sensors: Isolated for fluids compatible with 316L ss
Voltage & Current, Measurement, Sourcing, Sinkin
DC Voltage	±50 VDC measure, 0 - 24 VDC source
DC Current	±100 mA DC measure, 0 - 24 mA DC source, 1 - 24 mA sink at 3-50 VDC external power
Accuracy	±(0.015% of Reading +0.002 units)
Temperature Performance	Accuracy includes all affects of temperature from -20° to +50° C (-4° to +122° F)
Loop Power	250Ω HART® resistor included 24 VDC @ 4mA, 18.5 VDC @ 20mA Four (4) AA alkaline batteries power a transmitter at 20 mA output for 10 hours
Temperature
Operating	-4 to 122°F (-20 to 50°C)
Storage	-40 to 140°F (-40 to 60°C)
Connections
Pressure:	1/8" NPT (female)
Electrical	Standard banana jacks on 3/4" centers Firmware updates, data retrieval: USB mini-B (female)
Power
Portable service	Four (4) AA alkaline batteries provides 30+ hours of continuous measurement service
Operation with PC	Power over USB using USB type A to mini-B cable (requires high power 500 mA port)
Display	128 x 128 pixel (2" x 2" viewable) monochrome display with backlight
Keypad	Sealed membrane keypad with molded dome switches and integrated Adaptive Interface Wheel
Enclosure	8.5" L x 3.75" W (max.) x 2.25" D (max.), polycarbonate case, Softflex® over-molded bumpers, IP40
Weight	M400 single sensor: 1.5 - 1.8 lbs, M402 dual sensor: 1.8 lbs
Firmware Features	Sensor Zero, Sensor Damping, Averaging (pending), Minimum/Maximum capture, Tare (pending), Units Select, Data Logging, Data Logging Record Indicator, Selectable Off Timer, Selectable Backlight Timer, Adjustable Contrast, Adjustable Backlight Brightness, Battery Monitor
Field Recalibration	All sensors can be recalibration in the field using suitable reference standards. M4 Series products may also be returned to Meriam for factory recertification / recalibration service

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Meriam M400-CI0300-02 M4 Series Precision Calibrator Data Logger

Identifiers

Return and Warranty

Technical Details

Reviews