HDE DVI-500/K02 Digital Voltage Indicator

HDE, DVI-500/K02, Digital Voltage Indicator

Includes

• DVI-500
• (1) HP-DVI-2
• HP-DVI-6
• IEP-DVI-5
• PT-DVI and CS-DVI-5 Case

The DVI-500 is designed to be used on both transmission and distribution systems in overhead and underground applications. The DVI-500 indicates voltage from 0.1kV – 500kV and is auto-ranging with no range selector switch or settings required. Voltage is displayed on a large 1.45”LED display with a 3-digit readout. In addition, an audible alarm alerts the user to the presence of voltage above 100VAC. The DVI is auto shut-off and will turn off after 4 minutes of inactivity. Two overhead probes are supplied with the DVI-500 - a large 6”overhead hook probe for transmission system use (HP-DVI-6) and a smaller 2”overhead hook probe for distribution system use (HP-DVI-2). Simply attach the correct probe for the proper overhead application. Use of a hot stick is required for all overhead and underground applications. The DVI-500T can be used in underground applications to measure elbow test points using the underground probe (IEP-DVI-5).

Features

• For use on system voltages up to 800kV (reads up to 500kV line-to-ground)
• No range select or switch or settings required
• Large LED display indicates the line-to-ground voltage level
• Display is easy to read in bright or dark conditions
• Voltage readout allows the user to distinguish between nominal and induced voltages
• Audible indication when voltage is detected
• Measure elbow test points with the DVI-500T and DVI-100T
• Built-in universal spline for standard hot stick attachment
• Built-in self test to verify proper operation
• Auto shutoff with low battery function
• Powered by a field replaceable 9V lithium or alkaline battery
• Compact, rugged and lightweight polycarbonate housing