| Safety Category | IEC61010-1, CAT II 1000V, CAT III 500V and Pollution Degree 2 |
| Common Environment | 23°C±5°CC, less than 75% RH |
| Temperature Ranges | - 0°C to 40°C, 32 °F to 104 °F for Operating condition.
- 10 °C to 50°C, 14 °F to 122°F for Storage condition.
|
| Humidity Scope | - Operating condition less than 90% RH.
- Storage condition: less than 80% RH.
|
| Size | 160(W) x 105(D)x 40(H) MM |
| Weight | 390g approx. (including batteries 3pcs |
| Test Functions | Range | Accuracy | Remarks |
| DC V | - 0-0.1-0.5-2.5-10-50-250 V -1000V
| ± 3% FSD. ± 4% FSD. For 1000V | Input Impendence: 20KΩ/V Overload Protection: Max. 1000V AC/DC BUT 0.1V/0.5V/ 2.5V/10V/50V /250V Max. |
| AC V | 0-10-50-250V -1000V | ± 4% FSD. ± 5% FSD. For 1000V | Input Impendence: 9KΩ/V Overload Protection: Max. 1000V AC/DC But 10V/50V only 250V Max. Band width: 40 ~10K Hz |
| DC mA | 0-0.05-2.5-25- 250 mA, | ± 3% FSD. | Drop Voltage: 250 mV Overload protected by Fuses 0.5A/250V, and Oxide Varactor. <250V AC/DC(5s). |
| Ω | - X 1: 0.2 ~ 2KΩ midscale at 20Ω
- X 10: 2 ~ 20KΩ Midscale at 200Ω X 100: 20 ~ 200KΩ Midscale at 2000Ω
- X1K: 200~ 2MΩ Midscale at 20KΩ X10K: 2K ~ 20MΩ Midscale at 200KΩ
| ± 4% of ARC of Scale Length | Overload protected by the Oxide Varactor & Fuse <250V AC/DC(5s). |
| Capacit ance (uF) | 0.025-0.25-25uF (C2) | ± 3% FSD. | Use the Optional Accessory Kit MT-2007-C |
| 2000uF(C1) | Approximate Value | Use the R x 1K range |
| BATT Check | 0 ~ 1.5V: GOOD - ? - BAD 0 ~ 9V: GOOD - ? - BAD | ± 5% of ARC of Scale Length | Load Current: 270mA for 1.5V, 25mA for 9V. Overload protected by Fuse & Oxide Varactor .<250V AC/DC(5s). |
| Transist or Check | hFE: 0-1000 via special hFE socket | Approximate Value | At Ω X 10 Range |
| LED, Diode Check | via special hFE socket | Approximate Value | At Ω X 10 Range |
| Decibel | -22 dB ~ + 62 dB (0dB=1mW at 600Ω) | Approximate Value | At ACV ranges |
| POWE R Source | Internal Battery: R6P, AA, 1.5V 2pcs, 6F22, NEDA1604, 9V 1pc | | |
