Buy Cecomp Electronics T16ADABL2S, ThermoPro Temperature Alarm

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Probe:: Probe: Spring-Loaded
Cable Lenght:: Cable Lenght: 2"
Red Led Display Backlight:: Red Led Display Backlight: yes

Cecomp Electronics, T16ADABL2S, ThermoPro® Temperature Alarm with Red LED Led Display Backlight, 2.5" Length Spring-Loaded for Thermowell Probe

Features:

100 Ω Platinum RTD
316 Stainless Steel Probe
Programmable SPDT Relays
-58.0°F to 392.0°F or -50.0°C to 200.0°C
NEMA 4X Housing
Spring-Loaded Versions for Thermowells
User-programmable setpoints
User configurable relay operation
Pass code protected setup and calibration

See less

Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Range

–58.0 to 392.0°F or –50.0 to 200.0°C, selectable

Resolution

0.1 degree resolution

Typical Accuracy

Includes linearity error and ±1 LSD 11-point linearization

±0.7°C at –50°C
±0.4°C at 0°C
±0.9°C at 100°C
±1.4°C at 200°C

Display

4 readings per second nominal display update rate
4 digit LCD, 0.5" H
5 character 0.25" H alphanumeric
Low battery voltage indication(ALARM1 under range indication on display, ALARM2 over range indication on display)
red LED backlight

Sensor

IEC-751 Class B 100 Ω Platinum RTD, 0.00385 alpha curve 1 /2" NPT male, 316L stainless steel
All wetted parts are 316L stainless steel
Spring-loaded probe (thermowell required for spring-loaded versions)

Controls and Functions

4 button front keypad for setup, calibration, and configuration.
Multi-level user-defined pass codes to prevent unauthorized changes.
Pass code optional for output test and set point changes.
Pass code required for configuration and calibration.

Output Test Function

Test mode to toggle alarm relays
Output test function can be pass code protected

Relay Output

Two independent SPDT relays 0.5A/115VAC, 1A/24VDC, non-inductive
Alarm status updated 4 times per second nominal
Alarm configuration mode can be pass code protected
Each alarm programmable for either HI or LO set point
Each alarm programmable for deadband in degrees
Selectable upscale or downscale burnout
Selectable normal or reverse alarm action
Factory defaults: °F temperature scale, SP1 HI, SP2 LO, 1° deadband, downscale burnout, normal alarm action, configuration and test mode not pass code protected.
3 ft long, 6-conductor 22 AWG cable for relays

Calibration

User settable pass code required to enter calibration mode
Zero and span temperature calibration
Non-interactive zero, span, and linearity, ±10% of range

Power

8 to 24 VAC 50/60 Hz or 9 to 32 VDC
Reverse polarity protected
3 ft long, 2-conductor 22 AWG cable for power

Weight

Product: 12 ounces (approximately)
Shipping: 1 pound (approximately)

Housing Materials

ABS/polycarbonate NEMA 4X case, rear gasket, polycarbonate label, aluminum sensor block

Storage Temperature

–40 to 203°F (–40 to 95°C)

Operating Range

–4 to 185°F (–20 to 85°C) at housing

Cable Length

2.5"

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

***

warning WARNING: This product can expose you to chemicals including lead, nickel and chromium, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Details

Range

–58.0 to 392.0°F or –50.0 to 200.0°C, selectable

Resolution

0.1 degree resolution

Typical Accuracy

Includes linearity error and ±1 LSD 11-point linearization

±0.7°C at –50°C
±0.4°C at 0°C
±0.9°C at 100°C
±1.4°C at 200°C

Display

4 readings per second nominal display update rate
4 digit LCD, 0.5" H
5 character 0.25" H alphanumeric
Low battery voltage indication(ALARM1 under range indication on display, ALARM2 over range indication on display)
red LED backlight

Sensor

IEC-751 Class B 100 Ω Platinum RTD, 0.00385 alpha curve 1 /2" NPT male, 316L stainless steel
All wetted parts are 316L stainless steel
Spring-loaded probe (thermowell required for spring-loaded versions)

Controls and Functions

4 button front keypad for setup, calibration, and configuration.
Multi-level user-defined pass codes to prevent unauthorized changes.
Pass code optional for output test and set point changes.
Pass code required for configuration and calibration.

Output Test Function

Test mode to toggle alarm relays
Output test function can be pass code protected

Relay Output

Two independent SPDT relays 0.5A/115VAC, 1A/24VDC, non-inductive
Alarm status updated 4 times per second nominal
Alarm configuration mode can be pass code protected
Each alarm programmable for either HI or LO set point
Each alarm programmable for deadband in degrees
Selectable upscale or downscale burnout
Selectable normal or reverse alarm action
Factory defaults: °F temperature scale, SP1 HI, SP2 LO, 1° deadband, downscale burnout, normal alarm action, configuration and test mode not pass code protected.
3 ft long, 6-conductor 22 AWG cable for relays

Calibration

User settable pass code required to enter calibration mode
Zero and span temperature calibration
Non-interactive zero, span, and linearity, ±10% of range

Power

8 to 24 VAC 50/60 Hz or 9 to 32 VDC
Reverse polarity protected
3 ft long, 2-conductor 22 AWG cable for power

Weight

Product: 12 ounces (approximately)
Shipping: 1 pound (approximately)

Housing Materials

ABS/polycarbonate NEMA 4X case, rear gasket, polycarbonate label, aluminum sensor block

Storage Temperature

–40 to 203°F (–40 to 95°C)

Operating Range

–4 to 185°F (–20 to 85°C) at housing

Cable Length

2.5"

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Cecomp Electronics T16ADABL2S ThermoPro Temperature Alarm

Identifiers

Return and Warranty

Technical Details

Reviews