Buy Bradley 2922-287400, 2922 Sensor Hand Dryer

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Choose Options: Show more

Bradley, 2922-287400, 2922, Sensor Hand Dryer, Surface-Mounted, SS-Satin Finish

Product Materials:

ADJUSTABLE MOTOR: motor is a thermally-protected universal type operating at 23,400 RPM. Adjustable motor control switch has three settings; HI, MED and LOW.
HEATING ELEMENT: 400 watt heating element constructed of nichrome wire and protected by an automatic resetting thermal cutoff. Heater can be turned ON or OFF via internal switch.
SENSOR OPERATION: Automatic infrared sensor with a 3 second run-on time and a 30 second vandal shut-off.
BASE PLATE: Aluminum with four mounting holes and a 0.88" knockout.

Installation:

Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated 15 amp circuit and must be properly grounded. GFI Circuit protection is recommended. One side of dryer should be mounted to a stud. For proper mounting heights, see installation manual.

Operation:

Place hands 3"–6" below nozzle to activate air flow. Dryer will stop after hands are removed from air flow.

Guide:

Surface-mounted hand dryer shall have a white cast aluminum cover with epoxy paint (2922-2873) or stainless steel cover with satin finish (2922-2874). All internal air flow paths shall incorporate SteriTouch antimicrobial technology. Hand dryer shall include aluminum base plate, adjustable universal type motor and infrared sensor. Dryer shall operate at 73 - 85 dB while delivering 78-100 CFM air at a velocity of 250 - 265 MPH or 22,000 - 23,320 LFM. Dryer shall produce air at 110 - 140°F. Dryer shall have total power of 400 - 1200 watts with a consumption of 3.3 - 10.0 A.
Overall dimensions: 12.5"H x 9.3"W x 7.6"D (319mm x 236mm x 192mm).

Weight:

Aluminum - 11.6 lb (5.2 kg)
Stainless Steel - 14.2 lb (6.4 kg)

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Bradley items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Voltage:	100–120 V
Nominal power:	400–1200 W
Airflow:	78–100 CFM
Noise level	73–85 dB
Frequency:	60 Hz
Temperature:	110ºF–140ºF (43ºC–60ºC)
Drying time:	10–12 seconds
Protection level:	IP24
Consumption:	3.3–10.0 A
RPM:	23,400
Heating element:	400 W
Airspeed:	250–265 MPH
Insulation:	Grounding required
Certificates:	UL 499 / CSA C22.2 (No. 36-08)
Mounting:	Surface; not ADA compliant With recess kit*; ADA compliant

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

***

warning WARNING:This product can expose you to chemicals including Styrene, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Product Details

Voltage:	100–120 V
Nominal power:	400–1200 W
Airflow:	78–100 CFM
Noise level	73–85 dB
Frequency:	60 Hz
Temperature:	110ºF–140ºF (43ºC–60ºC)
Drying time:	10–12 seconds
Protection level:	IP24
Consumption:	3.3–10.0 A
RPM:	23,400
Heating element:	400 W
Airspeed:	250–265 MPH
Insulation:	Grounding required
Certificates:	UL 499 / CSA C22.2 (No. 36-08)
Mounting:	Surface; not ADA compliant With recess kit*; ADA compliant

Return and Warranty

Please note that return requests for Bradley items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Bradley 2922-287400 2922 Sensor Hand Dryer

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews