Big Horn 14335-KIT Band Saw Replacement Tire for 14" Wheel

Big Horn, 14335-KIT, Band Saw Replacement Tire for 14 Inch Wheel with Ball Bearing 6202ZZ

These premium quality bandsaw tires are made slightly smaller than wheel diameter to provide a tight fit. The tire may be trimmed to fit narrower wheels. Also includes replacement ball bearings.

Features:

• These tires do not dry out, therefore, they will not crack, peel or harden as rubber tires do
• They hold so tightly to the wheel you won't need to glue them down. Colored bright orange for easier inspection

Steps to Install:

• Remove the wheel from the saw, This greatly eases the installation of the tire.
• Take old tire off the wheel by prying it off with a flat-bladed screwdriver, being careful not to damage the wheel.
• Wash and clean the wheel thoroughly making sure that the face will fit is free of any bumps or pitch built-up that could cause a high spot on the tire when installed.
• Hook the tire in the groove and use a wooden dowel to roll the tire onto the wheel.
• Roll dowel around wheel under tire a couple of complete turns to equalize tension on the tire.
• Remove dowel being careful not to get fingers pinched when the tire snaps into the groove.
• Install wheel back on saw in the same location as before.

Note:

Always keep tires clean with Bandsaw Blade Cleaner. This will improve tire life and also help your blades to last longer.

Compatible with Machines:

Powermatic:

• PWBS-14 (1791216K) 1.5HP 1Ph 115/230V Bandsaw
• PWBS-14CS (1791216K) 1.5HP 1Ph 115/230V Bandsaw

Jet:

• JWBS-14DXPRO Delux Pro Band Saw
• JWBS-14CS (708115K) 14-inch Woodworking Band Saw
• JWBS-14OS (708113A) 14-inch Woodworking Band Saw