Across, IHL70AB, 70KW Low-Frequency Dual-Station Induction Heater 1-20KH
IHL70AB Includes Only:
- IHL70 induction heater - 1 set
- Power cable btw power supply and capacitor x 1
- Temp cable btw power supply and capacitor x 1
- Water cooled cable btw capacitor and coil x 2
- Remote on/off switch - 1 pc
- Stainless steel hose clamp - 1 set
- Fuse - 1 set
- Operation manual - 1 pc
Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes, steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4 lbs. They are not limited to ferromagnetic materials, so nonferrous metals can also be used effectively.
There are three major components to the system: the power supply, the compensating capacitor/transformer and the induction coil/smelting crucible. Heaters automatically adjust to the best resonant frequency in order to achieve the most efficient overall heating results based on customer's requirements which include heat penetration, heating efficiency, operating noise and electromagnetic homogeneity. Two of most popular low frequency machines are the Melting Furnaces with Tile-Pour Melter and Auto-feeding Rod Heating Furnaces for Forging.
Features
- Overvoltage protection: machine shuts down when input voltage is over 495V. Overvoltage light will turn on and buzzer will sound continuously. Alarm and light shut off automatically when voltage goes below 495V.
- Overheat protection: if sensor detects heat radiatortemperature is over 55C, machine will shut down, overheat light will turn on and buzzer will sound continuously. Increase water pressure or lower water temperature until alarm goes off itself.
- Overcurrent/malfunction protections: machine will shut down, indicator light turned on and buzzer sounds continuously if one of these situations occurs:
- One of the machine parts becomes overheated
- Interfering signal detected
- Short circuit between work pieces and induction coils
- Machine malfunctions
- Induction coils touching each other
- Input voltage is too low
- Low water pressure protection: if water pressure goes below 29 PSI, machine will shut down, water protection light will turn on and buzzer will sound continuously.
- Dual-station with connection cables and hose let you separate the heater and controller up to seven feet, allow you to stay away from high temperature, dirty and corrosive environment and for a safer operation, or if you need to move the heater to your work pieces constantly during operation.
- Ease of use: just plug in the power and connect the water cooling system. Simple instruction allows you to use the heater in 15 minutes.
- Relatively light weight, portable, instant heat and up to 90% energy savings.
- Procise control with digital output, frequency and current displays.
- Remote foot switch for safer operation.
- Dual automatic and manual modes.
- Custom coil design accessible (fixed coil or coil on a cable so it can be used like a wand)
