| Number Of Analog Input Channels | 10 channels |
| External Input | Trigger or Sampling (1 channel), Logic/Pulse (4 channels) |
| External Output | Alarm (4 channels) |
| Sampling Interval | 10 ms to 1 hour (10ms to 50ms: voltage only), External signal |
| 10 ms to 1 hour (10ms to 50ms: voltage only), External signal | 1 sec. to 24 hour /division |
| Trigger, Alarm Function - Trigger action | Start or stop capturing data by the trigger |
| Trigger, Alarm Function - Repeat action | Off, On (auto rearmed) |
| Trigger, Alarm Function - Trigger source | - Start: Off, Measured signal, Alarm, External, Clock, Week or Time
- Stop: Off, Measured signal, Alarm, External, Clock, Week or Time
|
| Trigger, Alarm Function - Condition Setting | - Combination: AND / OR
- Analog signal: Rising (High), Falling (Low), Window-in, Window-out
- Logic signal: Pattern (combination of each input signal in high or low)
- Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out
|
| Trigger, Alarm Function - Alarm output | Outputs a signal when alarm condition occurs in the input signal |
| Pulse Input Function - Rotation count (RPM) mode | - Counts the number of pulses per sampling interval and converts to rpm
- (rotations per minute), Number of pulses for one rotation can be set to
- 50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)
|
| Pulse Input Function - Rotation count (RPM) mode | Counts the number of pulses per sampling interval and converts to rpm (rotations per minute), Number of pulses for one rotation can be set to 50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale) |
| Pulse Input Function - Accumulating count mode | Accumulates the number of pulses from the start of measurement 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale) |
| Pulse Input Function - Instant count mode | Counts the number of pulses per sampling interval 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale) |
| Calculation Function - Between channels | Addition, Subtraction, Multiplication, and Division for analog input |
| Calculation Function - Statistical | Select two calculations from Average, Peak, Maximum, Minimum, RMS |
| Search Function | Search for analog signal levels, values of logic or pulse or alarm point in captured data |
| Interface To PC | USB (Hi-speed), WLAN (using B-568 option) |
| Storage Device - Internal | Built-in 4GB Flash Memory |
| Storage Device - External | One SD card slot (Supports SDHC memory card, up to 32GB) |
| Storage Device - Saved contents | Captured data, Setting conditions, Screen copy |
| Capturing Mode | - Mode: Normal, Ring, Relay
- Ring: Saves most recent data (Number of capturing data: 1000 to 2000000 points
- Relay: Saves data to multiple files without losing data until data capturing is stopped
|
| Replay Data | Replays captured data that was saved in the GL240 (in BGD or CSV format) |
| Scaling (Engineering Unit) Function | Measured value can be converted to specified engineering unit- Analog voltage: Converts using four reference points (gain, offset)
- Temperature: Converts using two reference points (offset)
- Pulse count: Converts using two reference points (gain)
|
| Action During Data Capture | - Displaying past data (using dual display mode (Current + Past data))
- Hot-swapping the SD memory card
- Saving data in between cursors
|
| Display (LCD) - Size | 4.3-inch TFT color LCD (WQVGA: 480 x 272 dots) |
| Display (LCD) - Language | English, French, German, Chinese, Korean, Russian, Spanish, Japanese |
| Display (LCD) - Information | Waveform in Y-T with digital values, Waveform only, Digital value, Digital values and statistics values, Bar chart |
| Operating Environment | 0 to 45 ºC, 5 to 85 % RH (non condensed) (When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC) |
| Power Source - AC adapter | 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory) |
| Power Source - DC power | 8.5 to 24 V DC (DC drive cable (option B-514) is required |
| Power Source - Battery pack | Mountable two battery packs (battery pack (option B-569): 7.2V DC, 2900mAh) |
| Power Consumption | Max. 38 VA |
| External Dimensions WxDxH | ~188 x 117 x 42 mm / 7.40" x 4.60" x 1.65" |
| Weight | ~ 500g / 1.10 lb. |
