Buy Viasensor G200-00L, G200 - Nitrous Oxide Monitor

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Package Contents:: Package Contents: Analyzer, Battery Charger, Sample Tube/Filter, Soda Lime CO2 Removal Kit & Hard Carry Case

Nitrous oxide monitor 0 to 1,000ppm N2Owith internal pump. Includes:- battery charger - sample tube / filters, Soda Lime CO2 removal kit - operating manual and supplied in a Hard Carry Case

See more product information See less

Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Supplies

Optional Accessories

Reviews

G200 CO2 N2O, 0-1000PPM GAS ANALYZER
POWER SUPPLY
Battery type	Li Ion
Battery life	>10 Hours (8 hours with pump)
Battery lifetime	>300 Cycles
Battery charger	5v DC external power supply and internal charging circuit
Charge time	<3 Hours
Alternative power	USB connector DC power supply
GAS RANGES
Gases Measured	N2O	By custom dual wavelength infra-red cell with reference channel
Range	N2O	0-1,000ppm 0-10,000ppm (leak detection mode)
Measurement Accuracy	Gas
	N2O	Resolution: 1ppm Accuracy: ±( 1.5% of range+ 2% of reading) at reference conditions* Temperature dependence: ±2ppm /oC (typical at 100ppm N2O) Pressure dependence: ±0.1% of reading/hPa (typical at 100ppm N2O)
Response time, T(90)	N2O	?40 seconds
FACILITIES
Visual and audible alarm	User selectable N2O and TWA alarms
Communications	USB type B mini-connector, HID device class
Data Storage	1000 reading sets + 270 events 50 Site ID"s and 300 sample point ID"s
PUMP
Flow	100cc/min typically (300cc/min MAX)
ENVIRONMENTAL CONDITIONS
Operating temperature	0°C to 50°C (32°F - 122°F)
Barometric pressure	500 to 1500mb
Relative humidity	5% to 95% non condensing
IP rating	IP40
PHYSICAL
Weight	500 grams
Size	L 165mm, W 100mm, D 55mm
Case Material	ABS / Polypropylene with Silicone Rubber Inserts
Keys	17 Resin capped Silicone rubber keys
Display	Liquid crystal display, 128 x 64 pixel With RGB LED back-light
Gas sample filters	User replaceable PTFE water trap filter G1.10 - Soda lime CO2 filter

* - Conditions during factory calibration, typically 20oC, 1000mBar

A - Analyser B - Mains Battery Charger C - Mains Battery Charger Adaptors: Europe, US, Australia D - Soda Lime CO2 Filter (G200 Only) E - Operating Manual
A - Main Read Screen	Where gas readings are displayed.
B - Soft-Keys	The function of the three "soft-keys" on the front of the instrument panel is determined by menu options taken. Functions vary dependant upon analyser model and from screen to screen.
C - On/Off Key	Press the "On/Off" key briefly to switch the instrument on and off.
D - Pump Key	Press the "Pump" key to start or stop the pump.
E - Key 4 - Scroll Left	Also "Key 4". Enables the operator to scroll left to display more information.
F - Key 8 - Scroll Down	Also "Key 8". Enables the operator to scroll down to display more information.
G - Menu Key	Press the "Menu" key to go to the "Main" menu. Enables the operator to preset values and settings. Select options from the "Main" menu to also view data and readings stored or held.
H - Enter Key	The "Enter" key accepts/confirms choices made by the operator to various functions and operations. Also required to confirm numeric data entry.
I - Key 2 - Scroll Up	Also "Key 2". Press scroll up to view further information on the instrument read screen.
J - Key 6 - Scroll Right	Also "Key 6". Press scroll right to view further information on the instrument read screen.
L - Serial Number	Unique identification for the instrument. Verification of the serial number will be required if Technical Support assistance is needed.
M - Instrument Stand	Instrument stand.
A - Gas Inlet	Gas inlet point used to attach the sample tube and sample filter in order to take the gas reading.
B - Gas Outlet	Gas outlet port used to exhaust the gas.
F - USB Cable Attachment Point	Used to connect the analyser to a PC via a USB cable on order to download data.
G - Mains Battery Charger Point	Used to attach the mains charger to the analyser for charging.

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

G200 CO2 N2O, 0-1000PPM GAS ANALYZER
POWER SUPPLY
Battery type	Li Ion
Battery life	>10 Hours (8 hours with pump)
Battery lifetime	>300 Cycles
Battery charger	5v DC external power supply and internal charging circuit
Charge time	<3 Hours
Alternative power	USB connector DC power supply
GAS RANGES
Gases Measured	N2O	By custom dual wavelength infra-red cell with reference channel
Range	N2O	0-1,000ppm 0-10,000ppm (leak detection mode)
Measurement Accuracy	Gas
	N2O	Resolution: 1ppm Accuracy: ±( 1.5% of range+ 2% of reading) at reference conditions* Temperature dependence: ±2ppm /oC (typical at 100ppm N2O) Pressure dependence: ±0.1% of reading/hPa (typical at 100ppm N2O)
Response time, T(90)	N2O	?40 seconds
FACILITIES
Visual and audible alarm	User selectable N2O and TWA alarms
Communications	USB type B mini-connector, HID device class
Data Storage	1000 reading sets + 270 events 50 Site ID"s and 300 sample point ID"s
PUMP
Flow	100cc/min typically (300cc/min MAX)
ENVIRONMENTAL CONDITIONS
Operating temperature	0°C to 50°C (32°F - 122°F)
Barometric pressure	500 to 1500mb
Relative humidity	5% to 95% non condensing
IP rating	IP40
PHYSICAL
Weight	500 grams
Size	L 165mm, W 100mm, D 55mm
Case Material	ABS / Polypropylene with Silicone Rubber Inserts
Keys	17 Resin capped Silicone rubber keys
Display	Liquid crystal display, 128 x 64 pixel With RGB LED back-light
Gas sample filters	User replaceable PTFE water trap filter G1.10 - Soda lime CO2 filter

* - Conditions during factory calibration, typically 20oC, 1000mBar

A - Analyser B - Mains Battery Charger C - Mains Battery Charger Adaptors: Europe, US, Australia D - Soda Lime CO2 Filter (G200 Only) E - Operating Manual
A - Main Read Screen	Where gas readings are displayed.
B - Soft-Keys	The function of the three "soft-keys" on the front of the instrument panel is determined by menu options taken. Functions vary dependant upon analyser model and from screen to screen.
C - On/Off Key	Press the "On/Off" key briefly to switch the instrument on and off.
D - Pump Key	Press the "Pump" key to start or stop the pump.
E - Key 4 - Scroll Left	Also "Key 4". Enables the operator to scroll left to display more information.
F - Key 8 - Scroll Down	Also "Key 8". Enables the operator to scroll down to display more information.
G - Menu Key	Press the "Menu" key to go to the "Main" menu. Enables the operator to preset values and settings. Select options from the "Main" menu to also view data and readings stored or held.
H - Enter Key	The "Enter" key accepts/confirms choices made by the operator to various functions and operations. Also required to confirm numeric data entry.
I - Key 2 - Scroll Up	Also "Key 2". Press scroll up to view further information on the instrument read screen.
J - Key 6 - Scroll Right	Also "Key 6". Press scroll right to view further information on the instrument read screen.
L - Serial Number	Unique identification for the instrument. Verification of the serial number will be required if Technical Support assistance is needed.
M - Instrument Stand	Instrument stand.
A - Gas Inlet	Gas inlet point used to attach the sample tube and sample filter in order to take the gas reading.
B - Gas Outlet	Gas outlet port used to exhaust the gas.
F - USB Cable Attachment Point	Used to connect the analyser to a PC via a USB cable on order to download data.
G - Mains Battery Charger Point	Used to attach the mains charger to the analyser for charging.

Supplies

Optional Accessories

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Viasensor G200-00L G200 - Nitrous Oxide Monitor

Identifiers

Return and Warranty

Technical Details

Supplies

Optional Accessories

Reviews