Buy Viasensor G150-11L, G150 CO2 & O2 Incubator Analyzer

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

IAQ analyser package 0-10,000 CO2 + 100% O2 with internal pump and G1.8 RH probe. Includes:- battery charger - sample tube / filters - operating manual

CO2 analyzer designed to monitor CO2 for all indoor air quality applications. This unit has been developed to incorporate the latest technology and specification requirements, that provide the user with a fast, simple to use and accurate piece of environmental field kit.

Features and Benefits

CO2 0-10,000 ppm
Options for:

O2 0-100%
Dual temperature probes 0 - 50°C
Data storage and download
Humidity Sensor 0 - 100%

Improved accuracy on CO2 readings
Quick verification of CO2 levels for site audits
Easy to ready large well lit display
Built in gas moisture removal

Applications

General IAQ
Environmental Site Audits
HVAC System approval
Illegal immigrant control/detection

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Supplies

Optional Accessories

Reviews

G100 CO2 INCUBATOR ANALYZER
POWER SUPPLY
Battery type	Li Ion
Battery life	10 Hours (8 hours with pump)
Battery lifetime	>300 Cycles
Battery charger	5v DC external power supply and internal charging circuit
Charge time	3 Hours
Alternative power	USB connector DC power supply
GAS RANGES
Gases Measured	CO2	By custom dual wavelength infra-red cell with reference channel
	O2 (Optional)	By internal electrochemical cell
Oxygen cell lifetime	Approximately 3 years in air
Range	CO2 O2	0-10,000ppm 0-100%
Measurement Accuracy	Gas
	CO2 O2	Accuracy: ±(1.5% of range + 2% of reading) at reference conditions* Temperature dependence: ±0.2% reading/oC (typical at 1,000ppm CO2) Pressure dependence: ±0.02% of reading/hPa (typical at 1,000ppm CO2) ±1.0% Full Scale @ constant temperature and pressure ±2.0% Full Scale over operating temperature range
Response time, T(90)	CO2 O2	?20 seconds ?60 seconds
FACILITIES
Temperature (Optional)	X2 using optional probes, range 0°C to +50.0°C
Temperature accuracy, typical	±0.2°C from 32 to 44oC, ±0.5°C over the rest of the range
Barometric pressure	800-1200 mbar
RH measurement (Optional)	RH Probe 0-100% RH non condensing
RH accuracy	±1.5%RH across the range
Visual and audible alarm	User selectable CO2 and O2 alarm levels
Communications	USB type B mini-connector, HID device class
Data Storage	1000 reading sets + 270 events
PUMP
Flow	100cc/min typically
ENVIRONMENTAL CONDITIONS
Operating temperature	5°C - 40°C
Relative humidity	0 - 95% non condensing (RH Probe 0-100% non condensing)
Barometric pressure	±500mbar from calibration pressure
PHYSICAL
Weight	495 grams
Size	L 165mm, W100mm, D55mm
Case Material	ABS / Polypropylene with Silicone Rubber Inserts
Keys	17 Resin capped Silicone rubber keys
Display	Liquid crystal display, 128 x 64 pixel With RGB LED back-light
Gas sample filters	Built-in gas dryer tube to remove moisture User replaceable PTFE water trap filter

* - Conditions during factory calibration, typically 20oC, 1000mBar

A - Analyser B - Operating Manual C - Mains Battery Charger D - Mains Battery Charger Adaptors:Europe, US, Australia
E - Sample Tube Kit: Sample Filter, Sample Tube
A - Main Read Screen	Start and end screen when using the instrument.
B - Soft-Keys	The function of the three "soft-keys" on the front of the instrument panel are determined by menu options taken. Functions vary from screen to screen.
C - On/Off Key	Press the "On/Off" key briefly to switch the instrument on and off.
D - Pump Key	Press the "Pump" key to start or stop the pump.
E - Key 4 - Scroll Left	Also "Key 4". Enables the operator to scroll left to display more information.
F - Key 8 - Scroll Down	Also "Key 8". Enables the operator to scroll down to display more information.
G - Menu Key	Press the "Menu" key to go to the "Main" menu. Enables the operator to pre-set values and settings. Select options from the "Main" menu to also view data and readings stored or held.
H - Enter Key	The "Enter" key accepts/confirms choices made by the operator to various functions and operations. Also, required to confirm numeric data entry.
I - Key 2 - Scroll Up	Also "Key 2". Press scroll up to view further information on the instrument read screen.
J - Key 6 - Scroll Right	Also "Key 6". Press scroll right to view further information on the instrument read screen.
K - Moisture Removal Tube	Removes the moisture from the sample gas.
L - Serial Number	Unique Identification for the instrument. Verification of the serial number will be required if Technical Support assistance is needed.
M - Instrument Stand	Instrument stand.
A - Temperature 1	Temperature 1 connector measures differential temperature - incubator and ambient temperatures.
B - Temperature 2	Temperature 2 connector measures differential temperature - incubator and ambient temperatures.
C - Humidity Probe (Optional)	Humidity probe attachment point.
D - Gas Outlet	Gas outlet port used to exhaust the gas.
E - Gas Inlet	Gas inlet point used to attach the sample tube and filter in order to take the gas reading.
F - USB Cable Attachment Point	Used to connect the analyser to a PC via a USB cable to download data.
G - Mains Battery Charger Point	Used to attach the mains charger to the analyser for charging.

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

G100 CO2 INCUBATOR ANALYZER
POWER SUPPLY
Battery type	Li Ion
Battery life	10 Hours (8 hours with pump)
Battery lifetime	>300 Cycles
Battery charger	5v DC external power supply and internal charging circuit
Charge time	3 Hours
Alternative power	USB connector DC power supply
GAS RANGES
Gases Measured	CO2	By custom dual wavelength infra-red cell with reference channel
	O2 (Optional)	By internal electrochemical cell
Oxygen cell lifetime	Approximately 3 years in air
Range	CO2 O2	0-10,000ppm 0-100%
Measurement Accuracy	Gas
	CO2 O2	Accuracy: ±(1.5% of range + 2% of reading) at reference conditions* Temperature dependence: ±0.2% reading/oC (typical at 1,000ppm CO2) Pressure dependence: ±0.02% of reading/hPa (typical at 1,000ppm CO2) ±1.0% Full Scale @ constant temperature and pressure ±2.0% Full Scale over operating temperature range
Response time, T(90)	CO2 O2	?20 seconds ?60 seconds
FACILITIES
Temperature (Optional)	X2 using optional probes, range 0°C to +50.0°C
Temperature accuracy, typical	±0.2°C from 32 to 44oC, ±0.5°C over the rest of the range
Barometric pressure	800-1200 mbar
RH measurement (Optional)	RH Probe 0-100% RH non condensing
RH accuracy	±1.5%RH across the range
Visual and audible alarm	User selectable CO2 and O2 alarm levels
Communications	USB type B mini-connector, HID device class
Data Storage	1000 reading sets + 270 events
PUMP
Flow	100cc/min typically
ENVIRONMENTAL CONDITIONS
Operating temperature	5°C - 40°C
Relative humidity	0 - 95% non condensing (RH Probe 0-100% non condensing)
Barometric pressure	±500mbar from calibration pressure
PHYSICAL
Weight	495 grams
Size	L 165mm, W100mm, D55mm
Case Material	ABS / Polypropylene with Silicone Rubber Inserts
Keys	17 Resin capped Silicone rubber keys
Display	Liquid crystal display, 128 x 64 pixel With RGB LED back-light
Gas sample filters	Built-in gas dryer tube to remove moisture User replaceable PTFE water trap filter

* - Conditions during factory calibration, typically 20oC, 1000mBar

A - Analyser B - Operating Manual C - Mains Battery Charger D - Mains Battery Charger Adaptors:Europe, US, Australia
E - Sample Tube Kit: Sample Filter, Sample Tube
A - Main Read Screen	Start and end screen when using the instrument.
B - Soft-Keys	The function of the three "soft-keys" on the front of the instrument panel are determined by menu options taken. Functions vary from screen to screen.
C - On/Off Key	Press the "On/Off" key briefly to switch the instrument on and off.
D - Pump Key	Press the "Pump" key to start or stop the pump.
E - Key 4 - Scroll Left	Also "Key 4". Enables the operator to scroll left to display more information.
F - Key 8 - Scroll Down	Also "Key 8". Enables the operator to scroll down to display more information.
G - Menu Key	Press the "Menu" key to go to the "Main" menu. Enables the operator to pre-set values and settings. Select options from the "Main" menu to also view data and readings stored or held.
H - Enter Key	The "Enter" key accepts/confirms choices made by the operator to various functions and operations. Also, required to confirm numeric data entry.
I - Key 2 - Scroll Up	Also "Key 2". Press scroll up to view further information on the instrument read screen.
J - Key 6 - Scroll Right	Also "Key 6". Press scroll right to view further information on the instrument read screen.
K - Moisture Removal Tube	Removes the moisture from the sample gas.
L - Serial Number	Unique Identification for the instrument. Verification of the serial number will be required if Technical Support assistance is needed.
M - Instrument Stand	Instrument stand.
A - Temperature 1	Temperature 1 connector measures differential temperature - incubator and ambient temperatures.
B - Temperature 2	Temperature 2 connector measures differential temperature - incubator and ambient temperatures.
C - Humidity Probe (Optional)	Humidity probe attachment point.
D - Gas Outlet	Gas outlet port used to exhaust the gas.
E - Gas Inlet	Gas inlet point used to attach the sample tube and filter in order to take the gas reading.
F - USB Cable Attachment Point	Used to connect the analyser to a PC via a USB cable to download data.
G - Mains Battery Charger Point	Used to attach the mains charger to the analyser for charging.

Supplies

Optional Accessories

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Viasensor G150-11L G150 CO2 & O2 Incubator Analyzer

Identifiers

Technical Details

Supplies

Optional Accessories

Reviews