Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)

PR electronics 9113AB-U9 Temperature / mA Converter, Double

  • Condition
    Brand New

Contact Us For Pricing

Availability
Contact Us
Check Availability
Quantity
Share:

PR Electronics, 9113AB-U9, Temperature / mA Converter, Double, cULus, ATEX, IECEx, FM, INMETRO, EAC-Ex

Features:

  • Configuration and monitoring by way of detachable display front; process calibration and signal simulation.
  • Copying of the configuration from one device to others of the same type via the display front.
  • TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor
  • Advanced monitoring of internal communication and stored data.
  • Input for RTD, TC and mA
  • Active / passive mA output via the same two terminals
  • 1 or 2 channels
  • Can be supplied separately or installed on power rail, PR type 9400
  • SIL 2-certified via Full Assessment
See more product information See less
Return and Warranty

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Reseller

Technical Details

Reviews
Operating temperature-20°C to +60°C
Storage temperature-20°C to +85°C
Calibration temperature20...28°C
Relative humidity< 95% RH (non-cond.)
Protection degreeIP20
Installation inPollution degree 2 and meas. / overvoltage cat. II
Dimensions (HxWxD)109 x 23.5 x 104 mm
Dimensions (HxWxD) w/ 4501/451x109 x 23.5 x 116 / 131 mm
Weight approx.250 g
Weight incl. 4501 / 451x (approx.)265 g / 280 g
DIN rail typeDIN EN 60715/35 mm
Wire size0.13...2.08 mm2AWG 26...14 stranded wire
Screw terminal torque0.5 Nm
VibrationIEC 60068-2-6
2...13.2 Hz+/-1 mm
13.2...100 Hz+/-0.7 g
Supply voltage19.2...31.2 VDC
Fuse400 mA SB / 250 VAC
Max. required power≤ 0.8 W/≤ 1.4 W (1 ch./2 ch.)
Max. power dissipation, 1 / 2 ch.≤ 0.8 W / ≤ 1.4 W
Test /working: Input to any2.6 kVAC / 300 VAC reinforced isolation
Analog output to supply2.6 kVAC / 300 VAC reinforced isolation
Status relay to supply1.5 kVAC / 150 VAC reinforced isolation
Temperature input, programmable (0...90%, 100...10%)1...60 s
mA / V input (programmable)0.4...60 s
ProgrammingPR 4500 communication interfaces
Signal / noise ratioMin. 60 dB (0...100 kHz)
Signal dynamics, input24 bit
Signal dynamics, output16 bit
AccuracyBetter than 0.1% of sel. range
EMC immunity influence< +/-0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< +/-1% of span
RTD typePt10/20/50/100/200/250/300/Pt400/500/1000; Ni50/100/120/1000
Cable resistance per wire50 Ω (max.)
Sensor currentNom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)< 0.002 Ω / Ω
Sensor error detectionProgrammable ON / OFF
Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via ext. sensor in 591020...28°C ≤ +/-1°C, -20...20°C / 28...70°C ≤ 2°C
CJC via int. mounted sensor+/-(2.0°C + 0.4°C * Δt)
Sensor error detectionProgrammable ON or OFF (only wire breakage)
Sensor error current: When detecting / elseNom. 2 μA / 0 μA
Measurement range0...23 mA
Programmable measurement ranges0...20 and 4...20 mA
Input resistanceNom. 20 Ω + PTC 50 Ω
Sensor error detectionProgrammable ON / OFF
Signal range0...23 mA
Programmable signal ranges0...20/4...20/20...0/20...4 mA
Load ( at current output)≤ 600 Ω
Load stability≤ 0.01% of span / 100 Ω
Sensor error indication0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals0...20.5 mA
Current limit≤ 28 mA
Max. external 2-wire supply26 VDC
Effect of external 2-wire supply voltage variation< 0.005% of span / V
Max. voltage125 VAC / 110 VDC
Max. current0.5 AAC / 0.3 ADC
Max. AC power62.5 VA / 32 W
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Operating temperature-20°C to +60°C
Storage temperature-20°C to +85°C
Calibration temperature20...28°C
Relative humidity< 95% RH (non-cond.)
Protection degreeIP20
Installation inPollution degree 2 and meas. / overvoltage cat. II
Dimensions (HxWxD)109 x 23.5 x 104 mm
Dimensions (HxWxD) w/ 4501/451x109 x 23.5 x 116 / 131 mm
Weight approx.250 g
Weight incl. 4501 / 451x (approx.)265 g / 280 g
DIN rail typeDIN EN 60715/35 mm
Wire size0.13...2.08 mm2AWG 26...14 stranded wire
Screw terminal torque0.5 Nm
VibrationIEC 60068-2-6
2...13.2 Hz+/-1 mm
13.2...100 Hz+/-0.7 g
Supply voltage19.2...31.2 VDC
Fuse400 mA SB / 250 VAC
Max. required power≤ 0.8 W/≤ 1.4 W (1 ch./2 ch.)
Max. power dissipation, 1 / 2 ch.≤ 0.8 W / ≤ 1.4 W
Test /working: Input to any2.6 kVAC / 300 VAC reinforced isolation
Analog output to supply2.6 kVAC / 300 VAC reinforced isolation
Status relay to supply1.5 kVAC / 150 VAC reinforced isolation
Temperature input, programmable (0...90%, 100...10%)1...60 s
mA / V input (programmable)0.4...60 s
ProgrammingPR 4500 communication interfaces
Signal / noise ratioMin. 60 dB (0...100 kHz)
Signal dynamics, input24 bit
Signal dynamics, output16 bit
AccuracyBetter than 0.1% of sel. range
EMC immunity influence< +/-0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst< +/-1% of span
RTD typePt10/20/50/100/200/250/300/Pt400/500/1000; Ni50/100/120/1000
Cable resistance per wire50 Ω (max.)
Sensor currentNom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)< 0.002 Ω / Ω
Sensor error detectionProgrammable ON / OFF
Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via ext. sensor in 591020...28°C ≤ +/-1°C, -20...20°C / 28...70°C ≤ 2°C
CJC via int. mounted sensor+/-(2.0°C + 0.4°C * Δt)
Sensor error detectionProgrammable ON or OFF (only wire breakage)
Sensor error current: When detecting / elseNom. 2 μA / 0 μA
Measurement range0...23 mA
Programmable measurement ranges0...20 and 4...20 mA
Input resistanceNom. 20 Ω + PTC 50 Ω
Sensor error detectionProgrammable ON / OFF
Signal range0...23 mA
Programmable signal ranges0...20/4...20/20...0/20...4 mA
Load ( at current output)≤ 600 Ω
Load stability≤ 0.01% of span / 100 Ω
Sensor error indication0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals0...20.5 mA
Current limit≤ 28 mA
Max. external 2-wire supply26 VDC
Effect of external 2-wire supply voltage variation< 0.005% of span / V
Max. voltage125 VAC / 110 VDC
Max. current0.5 AAC / 0.3 ADC
Max. AC power62.5 VA / 32 W
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Mega Depot
(800) 884-5767
+1 (332) 900-3727 (Intl.)