Buy PR electronics 5335A, 2-Wire Transmitter w/ HART 5 Protocol 8-35 V DC

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Supply Voltage:: Supply Voltage: 8-35 V DC

PR electronics, 5335A, 2-Wire Transmitter w/ HART 5 Protocol 8-35 V DC

Features

RTD, TC, Ohm, or mV input
Extremely high measurement accuracy
HART 5 protocol
Programmable sensor error value
For DIN form B sensor head mounting

Application

Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
Difference or average temperature measurement of 2 resistance or TC sensors.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
Connection of up to 15 transmitters to a digital 2-wire signal with HART communication.

See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Operating temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree (encl./terminal)	IP68 / IP00
Dimensions	Ø 44 x 20.2 mm
Weight approx.	50 g
Wire size	1 x 1.5 mm²stranded wire
Screw terminal torque	0.4 Nm
Vibration	IEC 60068-2-6
2...25 Hz	±1.6 mm
25...100 Hz	±4 g
Supply voltage	8.0...35 VDC
Isolation voltage, test / working	1.5 kVAC / 50 VAC
Response time (programmable)	1...60 s
Warm-up time	30 s
Programming	Loop Link & HART
Signal / noise ratio	Min. 60 dB
Accuracy	Better than 0.05% of selected range
Signal dynamics, input	22 bit
Signal dynamics, output	16 bit
Effect of supply voltage change	< 0.005% of span / VDC
EMC immunity influence	< ±0.1% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span
Max. offset	50% of selected max. value
RTD type	Pt100, Ni100, lin. R
Cable resistance per wire	5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5
Cold junction compensation (CJC)	< ±1.0°C
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 33 μA / 0 μA
Measurement range	-800...+800 mV
Min. measurement range (span)	2.5 mV
Input resistance	10 MΩ
Signal range	4…20 mA
Min. signal range	16 mA
Load (at current output)	≤ (Vsupply - 8) / 0.023 [Ω]
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
of span	= of the presently selected range
EMC	2014/30/EU
EAC	TR-CU 020/2011
ATEX 2014/34/EU	KEMA 03ATEX1508 X
IECEx	KEM 10.0083X
INMETRO	NCC 12.0844 X
DNV-GL Marine	Stand. f. Certific. No. 2.4
SIL	Hardware assessed for use in SIL applications

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Operating temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree (encl./terminal)	IP68 / IP00
Dimensions	Ø 44 x 20.2 mm
Weight approx.	50 g
Wire size	1 x 1.5 mm²stranded wire
Screw terminal torque	0.4 Nm
Vibration	IEC 60068-2-6
2...25 Hz	±1.6 mm
25...100 Hz	±4 g
Supply voltage	8.0...35 VDC
Isolation voltage, test / working	1.5 kVAC / 50 VAC
Response time (programmable)	1...60 s
Warm-up time	30 s
Programming	Loop Link & HART
Signal / noise ratio	Min. 60 dB
Accuracy	Better than 0.05% of selected range
Signal dynamics, input	22 bit
Signal dynamics, output	16 bit
Effect of supply voltage change	< 0.005% of span / VDC
EMC immunity influence	< ±0.1% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span
Max. offset	50% of selected max. value
RTD type	Pt100, Ni100, lin. R
Cable resistance per wire	5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5
Cold junction compensation (CJC)	< ±1.0°C
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 33 μA / 0 μA
Measurement range	-800...+800 mV
Min. measurement range (span)	2.5 mV
Input resistance	10 MΩ
Signal range	4…20 mA
Min. signal range	16 mA
Load (at current output)	≤ (Vsupply - 8) / 0.023 [Ω]
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
of span	= of the presently selected range
EMC	2014/30/EU
EAC	TR-CU 020/2011
ATEX 2014/34/EU	KEMA 03ATEX1508 X
IECEx	KEM 10.0083X
INMETRO	NCC 12.0844 X
DNV-GL Marine	Stand. f. Certific. No. 2.4
SIL	Hardware assessed for use in SIL applications

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

PR electronics 5335A 2-Wire Transmitter w/ HART 5 Protocol 8-35 V DC

Identifiers

Technical Details

Reviews