Buy PR electronics 4116, Universal Transmitter, 2 Relays

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

4116, Universal transmitter

Features:

Input for RTD, TC, Ohm, potentiometer, mA and V
2-wire supply > 16 V
FM-approved for installation in Div. 2
Output for current, voltage and 2 relays
Universal AC or DC supply

Technical characteristics:

When 4116 is used in combination with the 4501 display / programming front (sold separatly), all operational parameters can be modified to suit any application. As the 4116 is designed with electronic hardware switches, it is not necessary to open the device for setting of DIP-switches.
A green / red front LED indicates normal operation and malfunction. A yellow LED is ON for each active output relay.
Continuous check of vital stored data for safety reasons.
4-port 2.3 kVAC galvanic isolation.

Application:

Linearized, electronic temperature measurement with RTD or TC sensor.
Conversion of linear resistance variation to a standard analog current / voltage signal, i.e. from solenoids and butterfly valves or linear movements with attached potentiometer.
Power supply and signal isolator for 2-wire transmitters.
Process control with 2 pairs of potential-free relay contacts and analog output.
Galvanic separation of analog signals and measurement of floating signals.
The 4116 is designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.

NOTE: To program the item 4116 you'll need the p/n 4501 (sold separartly).

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Optional Accessories

Reviews

Operating temperature	-20°C to +60°C
Storage temperature	-20°C to +85°C
Calibration temperature	20…28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Dimensions (HxWxD)	109 x 23.5 x 104 mm
Weight approx.	170 g
Wire size	1 x 2.5 mm2 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6
2…13.2 Hz	±1 mm
13.2…100 Hz	±0.7 g
Supply voltage, universal	21.6…253 VAC, 50…60 Hz or 19.2…300 VDC
Max. required power	≤ 2.5 W
Isolation voltage, test / working	2.3 kVAC / 250 VAC
Temperature input (0…90%, 100…10%)	≤ 1 s
mA / V input (0…90%, 100…10%)	≤ 400 ms
2-w. supply (term. 44…43)	25…16 VDC / 0…20 mA
Fuse	400 mA SB / 250 VAC
Programming	Communication enabler 4511 / Programming front 4501
Signal / noise ratio	Min. 60 dB (0…100 kHz)
Accuracy	Better than 0.1% of selected range
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE 21, A criterion, burst	< ±1% of span
RTD type	Pt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100
Cable resistance per wire (max.)	50 Ω
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
Short circuit detection	< 15 Ω
Linear resistance min….max.	0 Ω…10000 Ω
Potentiometer min….max.	10 Ω…100 kΩ
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via ext. sensor in connector 5910	20…28°C ≤ ±1°C, -20…20°C / 28…70°C ≤ 2°C
CJC via internally mounted sensor	±(2.0°C + 0.4°C * Δt)
Δt =	Internal temperature-ambient temperature
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 2 μA / 0 μA
Measurement range	0…20 mA
Programmable measurement ranges	0…20 and 4…20 mA
Input resistance	Nom. 20 Ω + PTC 50 Ω
Sensor error detection: Loop break 4…20 mA	Yes
Measurement range	0…12 VDC
Programmable measurement ranges	0/0.2…1, 0/1…5, 0/2…10 VDC
Input resistance	Nom. 10 MΩ
Output specifications
Signal range	0...20 mA
Programmable signal ranges	. 0...20/4...20/20...0/20...4 mA
Load (@ current output)	≤ 800 Ω
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals	3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals	0...20.5 mA
Current limit	≤ 28 mA
Voltage output
Signal range	0...10 VDC
Programmable signal ranges	0/0.2...1; 0/1...5 ; 0/2...10; 1...0.2/0; 5...1/0; 10...2/0 V
Load (@ voltage output)	≥ 500 kΩ
Relay output
Relay functions	Setpoint, Window, Sensor error, Latch, Power and Off
Max. voltage	250 VRMS
Max. current	2 AAC or 1 ADC
Max. AC power	500 VA

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Operating temperature	-20°C to +60°C
Storage temperature	-20°C to +85°C
Calibration temperature	20…28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Dimensions (HxWxD)	109 x 23.5 x 104 mm
Weight approx.	170 g
Wire size	1 x 2.5 mm2 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6
2…13.2 Hz	±1 mm
13.2…100 Hz	±0.7 g
Supply voltage, universal	21.6…253 VAC, 50…60 Hz or 19.2…300 VDC
Max. required power	≤ 2.5 W
Isolation voltage, test / working	2.3 kVAC / 250 VAC
Temperature input (0…90%, 100…10%)	≤ 1 s
mA / V input (0…90%, 100…10%)	≤ 400 ms
2-w. supply (term. 44…43)	25…16 VDC / 0…20 mA
Fuse	400 mA SB / 250 VAC
Programming	Communication enabler 4511 / Programming front 4501
Signal / noise ratio	Min. 60 dB (0…100 kHz)
Accuracy	Better than 0.1% of selected range
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE 21, A criterion, burst	< ±1% of span
RTD type	Pt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100
Cable resistance per wire (max.)	50 Ω
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
Short circuit detection	< 15 Ω
Linear resistance min….max.	0 Ω…10000 Ω
Potentiometer min….max.	10 Ω…100 kΩ
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via ext. sensor in connector 5910	20…28°C ≤ ±1°C, -20…20°C / 28…70°C ≤ 2°C
CJC via internally mounted sensor	±(2.0°C + 0.4°C * Δt)
Δt =	Internal temperature-ambient temperature
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 2 μA / 0 μA
Measurement range	0…20 mA
Programmable measurement ranges	0…20 and 4…20 mA
Input resistance	Nom. 20 Ω + PTC 50 Ω
Sensor error detection: Loop break 4…20 mA	Yes
Measurement range	0…12 VDC
Programmable measurement ranges	0/0.2…1, 0/1…5, 0/2…10 VDC
Input resistance	Nom. 10 MΩ
Output specifications
Signal range	0...20 mA
Programmable signal ranges	. 0...20/4...20/20...0/20...4 mA
Load (@ current output)	≤ 800 Ω
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
Output limitation, on 4...20 and 20...4 mA signals	3.8...20.5 mA
Output limitation, on 0...20 and 20...0 mA signals	0...20.5 mA
Current limit	≤ 28 mA
Voltage output
Signal range	0...10 VDC
Programmable signal ranges	0/0.2...1; 0/1...5 ; 0/2...10; 1...0.2/0; 5...1/0; 10...2/0 V
Load (@ voltage output)	≥ 500 kΩ
Relay output
Relay functions	Setpoint, Window, Sensor error, Latch, Power and Off
Max. voltage	250 VRMS
Max. current	2 AAC or 1 ADC
Max. AC power	500 VA

Optional Accessories

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

PR electronics 4116 Universal Transmitter, 2 Relays

Identifiers

Technical Details

Optional Accessories

Reviews