Buy PR electronics 3105, 0C to +70C Isolated Converter

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Type:: Type: 0C to +70C Isolated Converter

PR electronics, 3105, Isolated converter

Features:

Isolation and conversion of standard DC signals
Slimline housing of 6 mm
Response time <7 ms
Low cost
DIP-switch configured

Application:

Isolation and conversion of standard DC signals.
Galvanic separation of analog current and voltage signals.
Elimination of ground loops and measurement of floating signals.
A competitive choice in terms of both price and technology for galvanic isolation of current and voltage signals to SCADA systems or PLC equipment.
Suitable for environments with high vibration stress, e.g. ships.

Characteristics:

Easy configuration via DIP-switches.
The input is protected against overvoltage and polarity error.
Factory-calibrated measurement ranges.
Inputs and outputs are floating and galvanically separated.

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Environmental Conditions
Operating temperature	0°C to +70°C
Storage temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Installation in	Pollution degree 2 & meas. / overvoltage cat. II
Mechanical specifications
Dimensions (HxWxD)	113 x 6.1 x 115 mm
Weight approx.	70 g
DIN rail type	DIN EN 60715/35 mm
Wire size	0.13...2.5 mm2 / AWG 26...12 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6
2...25 Hz	±1.6 mm
25...100 Hz	±4 g
Supply voltage	16.8...31.2 VDC
Max. required power	0.80 W
Max. power dissipation	0.52 W
Isolation voltage
Isolation voltage, test / working	2.5 kVAC / 300 VAC (reinforced)
Response time	250 VAC
Response time (0...90%, 100...10%)	< 7 ms
Programming	DIP-switches
Signal / noise ratio	> 60 dB
Cut-off frequency (3 dB)	> 100 Hz
Signal dynamics, input	Analog signal chain
Signal dynamics, output	Analog signal chain
Accuracy	Better than 0.2% of selected range
Temperature coefficient	< ±0.015% of span / ˚C
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span
Input specifications	< ±1% of span
Current input	Better than 0.1% of span or 0.2°C
Measurement range	0...23 mA
Programmable measurement ranges	0...20 and 4...20 mA
Input voltage drop	< 1.5 VDC
Voltage input	< 1.5 VDC
Measurement range	0...10.25 V 0...11.5 V / 0...5.75 V
Programmable measurement ranges	0/1...5 and 0/2...10 V
Input resistance	≥ 500 kΩ
Output specifications	≥ 500 kΩ
Current output	> 17 V / 20 mA
Signal range	0...23 mA
Programmable signal ranges	0 / 4...20 mA
Load ( at current output)	≤ 600 Ω
Load stability	≤ 0.002% of span / 100 Ω
Current limit	≤ 28 mA
Voltage output	≤ 0.002% of span / 100 Ω
Signal range	0...10 VDC
Programmable signal ranges	0/1...5 and 0/2...10 V
Load ( at voltage output)	≥ 10 kΩ
Observed authority requirements	≥ 10 kΩ
EMC	2014/30/EU
LVD	2014/35/EU
RoHS	2011/65/EU
EAC	TR-CU 020/2011
Approvals	Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
c UL us, UL 61010-1	E314307
DNV Marine	TAA00001RW

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Environmental Conditions
Operating temperature	0°C to +70°C
Storage temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Installation in	Pollution degree 2 & meas. / overvoltage cat. II
Mechanical specifications
Dimensions (HxWxD)	113 x 6.1 x 115 mm
Weight approx.	70 g
DIN rail type	DIN EN 60715/35 mm
Wire size	0.13...2.5 mm2 / AWG 26...12 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6
2...25 Hz	±1.6 mm
25...100 Hz	±4 g
Supply voltage	16.8...31.2 VDC
Max. required power	0.80 W
Max. power dissipation	0.52 W
Isolation voltage
Isolation voltage, test / working	2.5 kVAC / 300 VAC (reinforced)
Response time	250 VAC
Response time (0...90%, 100...10%)	< 7 ms
Programming	DIP-switches
Signal / noise ratio	> 60 dB
Cut-off frequency (3 dB)	> 100 Hz
Signal dynamics, input	Analog signal chain
Signal dynamics, output	Analog signal chain
Accuracy	Better than 0.2% of selected range
Temperature coefficient	< ±0.015% of span / ˚C
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span
Input specifications	< ±1% of span
Current input	Better than 0.1% of span or 0.2°C
Measurement range	0...23 mA
Programmable measurement ranges	0...20 and 4...20 mA
Input voltage drop	< 1.5 VDC
Voltage input	< 1.5 VDC
Measurement range	0...10.25 V 0...11.5 V / 0...5.75 V
Programmable measurement ranges	0/1...5 and 0/2...10 V
Input resistance	≥ 500 kΩ
Output specifications	≥ 500 kΩ
Current output	> 17 V / 20 mA
Signal range	0...23 mA
Programmable signal ranges	0 / 4...20 mA
Load ( at current output)	≤ 600 Ω
Load stability	≤ 0.002% of span / 100 Ω
Current limit	≤ 28 mA
Voltage output	≤ 0.002% of span / 100 Ω
Signal range	0...10 VDC
Programmable signal ranges	0/1...5 and 0/2...10 V
Load ( at voltage output)	≥ 10 kΩ
Observed authority requirements	≥ 10 kΩ
EMC	2014/30/EU
LVD	2014/35/EU
RoHS	2011/65/EU
EAC	TR-CU 020/2011
Approvals	Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
c UL us, UL 61010-1	E314307
DNV Marine	TAA00001RW

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

PR electronics 3105 0C to +70C Isolated Converter

Identifiers

Technical Details

Reviews