Buy Pfannenberg 12351020005, PWS 7102 Water Heat Exchanger

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Pfannenberg, 123 5102 0005, PWS 7102 230VAC Air/Water Heat Exchanger, 1000W Capacity

Includes:

PWS Series accessory pack typically includes:

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Cooling data
Cooling capacity at (cab temp. 35°C / water temp. 10 °C/ water flow rate 200 l/h)	950 W
Refrigerant	Water
Thermostat setting ( factory setting)	+35°C / 95°F
Thermostat range of adjustment	min. 8°C / 46,4°F - max. 50°C / 122°F
Water flow rate	200 l / h (53 Gal / h)
Water inlet temperature (nominal /range)	10°C (>+1°C to +35°C) / 50°F (>+34°F to +95°F)
Operating pressure	1 to 10 bar (14.5 to 145 psi)
Air volume	260 m³ / h (153 CFM)
Ambient air temperature	+2°C / 36°F . . . +70°C / 158°F
Enclosure internal temp.	+25°C / 77°F . . . +45°C / 113°F
Duty cycle	100 %
Noise level (1m)	48 db(A)
Condensation discharge	Through condensate drain connection
Electrical data
Rated voltage	230V AC
Mains frequency	50/60 Hz
Power consumption	84 W
Rated current	0.4 A
Starting current	1.8 A
Terminal connection wire gauge	max. 2,5 mm2 / AWG 16
Pre-fuse T	4 A gG
Temperature monitoring (alarm)	max.230V AC, 8 (1,5)A cosφ=1 (0,6)max. 230V DC, 0,25A
Alarm switch setting (Thermostat Option Only)	+10°C over temperature set point
Dimensions
Height x Width x Depth: mm (in)	500 x 200 x 138 (19.69 x 7.87 x 5.43)
Weight without packaging: kg (pounds)	7.5 (16.5)
Other
Installation orientation	vertical
Cooling water connection	Hose nipple 13mm (1/2")
Condensate discharge	Pipe d=12mm
Unit construction	steel
Corrosion protection	Galvanized steel, electrostatically powder coated(200°C) / stainless steel
Protective category (UL)	Type 12 / 3R4 / 4X (stainless steel)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Cooling data
Cooling capacity at (cab temp. 35°C / water temp. 10 °C/ water flow rate 200 l/h)	950 W
Refrigerant	Water
Thermostat setting ( factory setting)	+35°C / 95°F
Thermostat range of adjustment	min. 8°C / 46,4°F - max. 50°C / 122°F
Water flow rate	200 l / h (53 Gal / h)
Water inlet temperature (nominal /range)	10°C (>+1°C to +35°C) / 50°F (>+34°F to +95°F)
Operating pressure	1 to 10 bar (14.5 to 145 psi)
Air volume	260 m³ / h (153 CFM)
Ambient air temperature	+2°C / 36°F . . . +70°C / 158°F
Enclosure internal temp.	+25°C / 77°F . . . +45°C / 113°F
Duty cycle	100 %
Noise level (1m)	48 db(A)
Condensation discharge	Through condensate drain connection
Electrical data
Rated voltage	230V AC
Mains frequency	50/60 Hz
Power consumption	84 W
Rated current	0.4 A
Starting current	1.8 A
Terminal connection wire gauge	max. 2,5 mm2 / AWG 16
Pre-fuse T	4 A gG
Temperature monitoring (alarm)	max.230V AC, 8 (1,5)A cosφ=1 (0,6)max. 230V DC, 0,25A
Alarm switch setting (Thermostat Option Only)	+10°C over temperature set point
Dimensions
Height x Width x Depth: mm (in)	500 x 200 x 138 (19.69 x 7.87 x 5.43)
Weight without packaging: kg (pounds)	7.5 (16.5)
Other
Installation orientation	vertical
Cooling water connection	Hose nipple 13mm (1/2")
Condensate discharge	Pipe d=12mm
Unit construction	steel
Corrosion protection	Galvanized steel, electrostatically powder coated(200°C) / stainless steel
Protective category (UL)	Type 12 / 3R4 / 4X (stainless steel)

Note: Please read description carefully. Do not base your order on the picture presented.