General specifications |
Output voltage | 230/240 V – 50/60 Hz (selectable) |
Output waveform | true sine |
Nominal battery voltage | 12 V |
Recommended battery capacity | ≥ 270 Ah |
Continuous power at 25 °C / 77 °F, cos phi 1 | 2500 W |
Continuous power at 40 °C / 104 °F, cos phi 1 | 2500 W |
Peak load (3 sec.) | < 3000 W |
Peak load (< 0.2 sec.) | < 4000 W |
AC connection | hardwired + plug connection EU (Schuko) or with NZ/AU plug (code 28412500) |
Efficiency | 88 % |
Parallel configuration | yes, up to 15 units |
3-Phase configuration | yes, 3 units |
Display/read-out | LED indication: battery voltage, status |
Alarms | potential free alarm contact |
Dimensions, hxwxd | 283 x 436 x 128 mm 11.1 x 17.2 x 5.0 inch |
Weight | 8 kg 17.6 lb |
Approvals | CE, E-mark, RCM |
Technical specifications |
Technology | high frequency, input & output fully isolated |
Low battery voltage, switches off at | 10.5 V |
Low battery voltage, switches on at | 12.5 V |
High battery voltage, switches off at | 16.5 V |
High battery voltage, switches on at | 14.5 V |
Input current (nominal load) | 250 A |
No-load power consumption (ON mode) | < 3.6 A |
No-load power consumption (energy saving mode) | < 1.1 A |
Minimal DC fuse (slow blow) | 300 A |
Minimal cable size | 95 mm² |
Harmonic distortion typical | < 5 % |
Cos phi | all power factors allowed |
Transfer system | integrated, automatic (inverter to grid: 8~10 ms, grid to inverter: 16~50 ms). Not for parallel & 3-phase operation (external transfer system possible) |
Temperature range (ambient temp.) | -20 °C to 60 °C, derating power > 40 °C -4 °F to 140 °F |
Protection degree | IP21, horizontal wall mounting |
Protections | over-temperature, overload, short circuit, high/low voltage, reverse polarity (fuse) |
Cooling | temperature and load controlled fan |
MasterBus compatible | no |