Buy Mark-10 F105-IM, Test Frame, Software, Single License, Vertical

info@MegaDepot.com

(800) 884-5767
+1 (332) 900-3727 (Intl.)

Options and Related Products

Equipment:: Equipment: software, single license

Mark-10, F105-IM, Test frame with IntelliMESUR software, single license, vertical, 100 lbF / 0.5 kN

Rigid and precise by design

Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

Conveniently modular

Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.

External limit switches

Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.

Easy-to-service electronics

Most electronics are housed in an integrated module, easily replaced without special tools or processes.

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Load capacity

100 lbF [0.5 kN]

Maximum travel:

18.0 in
[457 mm]

Speed range:

0.02 - 45 in/min
[0.5 - 1,100 mm/min]

Load accuracy
(% of full scale)

Test frame: ±0.1%
Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%

Load sampling rate:

20,000 Hz

Data acquisition rate:

1,000 Hz

Speed accuracy:

±0.2% of setting, virtually no variation with load

Distance accuracy:

±0.002 in [0.05 mm], factory-compensated at up to full load

Distance resolution:

0.0005 in [0.01 mm]

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 100-240 VAC, 50/60 Hz, 300W

Fuse type:

1.2 A, 250V, 3AG, SLO BLO

Weight

60 lb [27 kg]

Environmental conditions

Indoor use only
Up to 6,500 ft [2,000 m] above sea level
Temperature range: 40 - 95°F [5 - 35°C]
Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2

Conformance

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Load capacity

100 lbF [0.5 kN]

Maximum travel:

18.0 in
[457 mm]

Speed range:

0.02 - 45 in/min
[0.5 - 1,100 mm/min]

Load accuracy
(% of full scale)

Test frame: ±0.1%
Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%

Load sampling rate:

20,000 Hz

Data acquisition rate:

1,000 Hz

Speed accuracy:

±0.2% of setting, virtually no variation with load

Distance accuracy:

±0.002 in [0.05 mm], factory-compensated at up to full load

Distance resolution:

0.0005 in [0.01 mm]

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 100-240 VAC, 50/60 Hz, 300W

Fuse type:

1.2 A, 250V, 3AG, SLO BLO

Weight

60 lb [27 kg]

Environmental conditions

Indoor use only
Up to 6,500 ft [2,000 m] above sea level
Temperature range: 40 - 95°F [5 - 35°C]
Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2

Conformance

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Mark-10 F105-IM Test Frame, Software, Single License, Vertical

Identifiers

Technical Details

Reviews