Gizmo Engineering T6-S2-24VDC Large Display Industrial Timer, 24VDC

Features:

• Counts down anywhere between 1 second to 100 hours.
• Front button indicates power present.
• Waterproof rating IP65.
• Large display.
• Piggyback plug output with 10A relay.
• Powered from 24VDC.

The time counts down from preset time. (or counts up if starting from zero). The green stack light LED illuminates while timing. At the end of the time cycle, the alarm sounds and the red LED illuminates. Has a double stack-light (red/green). When timing starts, the green light illuminates. When cycle is over, the red LED illuminates and buzzer sounds.

Many different modes available:

• Mode 1 counts down from the set time. Early warning on LED1. (amber LED) Cycle can be cancelled by holding the start button. If time is set to zero then it counts up.
• Mode 2 like mode 1 but does not allow cancellation.
• Mode 3 is for triggering the time cycle mechanically with a contact close (like a proximity switch) that remains closed throughout the countdown.
• Mode 4 allows pausing and re-starting the cycle until the time accumulates to set value.
• Mode 5 stops automatically at the end of cycle.
• Mode 6 provides an early warning on the beacon LED.
• Mode 7 is a guard duty that requires the start button to pressed continually or else an alarm sounds (cycle repeats indefinitely).
• Mode 8 is especially for spray rinses in plating operations.
• Mode 9 is an machine run-time countdown.
• Mode 10 is a machine hours totalizer countdown. It can be triggered either by presence of power or a contact close.
• Mode 11 is a repeating interval cycle.