| Power Supplies: | 0V to 20VDC @ .5 amp (0V to 15V @ 1 amp) |
| 0V to -20VDC @ .5 amp (0V to -15V @ 1 amp) |
| +12V +5% @ 1 amp |
| -12V +5% @ 1 amp |
| +5V +5% @ 1 amp |
| 30V AC center-tapped at 15VAC @ 1 amp |
| Load regulation all DC supplies less than .2V no load to .5A |
| Line regulation all DC supplies less than .2V 105 to 135V |
| Hum and ripple all DC supplies less than .01V rms |
| Short protection all DC supplies - Internal IC thermal cutoff |
| Fuse - 1.25A, 250V |
| Function Generator Analog Section: | Waveforms sine, square, triangle, complimentary square |
| Frequency - 1Hz to 100kHz in 5 steps continuously variable |
| Fine frequency adjust - 10:1 approximate |
| Amplitude variable 0-15Vpp |
| Output impedance 330Ω: short protected |
| DC offset change +10V from zero crossing |
| Digital Section: | Data switches, eight DPDT, Hi 5V, low 0V |
| Logic switches, two no bounce with complimentary output “On” voltage level 2.8V min., “Off” voltage level 1V max. Input impedance 100kΩ. |
| Eight LED readouts, 100kΩ input impedance |
| Clock frequency, 1Hz to 100kHz in 5 steps continuously variable |
| Clock amplitude, 5Vpp squarewave |
| Clock rise time, better than 100nsec. |
| Bredboards Section: | Two bredboards containing 830 tie points each (total 1,660 pins) |
| 6 independent power bus lines for common connections |
| Variable Resistance (undedicated): | 1kΩ Potentiometer |
| 100kΩ Potentiometer |
| Potentiometers: | 2 undedicated potentiometers 1kΩ & 100kΩ. |
| Bredboards: | 2 bredboards, each containing 830 tie points (total 1,660). |
| Fast Track Construction: | Most of the components are on one PC board, eliminating all
wires between the PC board, pots, regulators and switches.
Makes assembly easier and faster, eliminates errors. |
