Bradley 2905-2873CE 2905 Sensor Hand Dryer, 7 amps

Bradley, 2905-2873CE, 2905, Sensor Hand Dryer, Surface-Mounted 220−240 volt, 7 amps, 50 Hz with EUROPLUG

Product Materials:

• COVER: 5 ⁄64" (1.9mm) thick steel one-piece cover with white epoxy coating. Cover fixed to the base with four Allen-head screws.
• MOTOR: durable, maintenance-free shaded pole motor with safety thermostat and self-resetting thermal cut-off at 266ºF (130ºC). PP UL94-V0 with single inlet fan wheel.
• HEATING ELEMENT: waved wire NiCr 40 heating element that incorporates a self-resetting thermal cut-off at 158ºF (70ºC).
• ELECTRONIC CONTROL: two distances (15/25 cm) IR electronic detection sensor with zamak air outlet grill.
• BASE PLATE: thermoplastic ABS UL 94-V0 base and single-inlet centrifugal scroll fan; with four diametr 5 ⁄16" (8mm) holes for wall mounting.

Installation:

• Verify all Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated circuit and must be properly grounded. GFI Circuit protection is recommended. One side of dryer should be mounted to a stud.

Operation:

• Place hands 3"−6" below air outlet grill to activate air flow. Dryer will stop two seconds after hands are removed from air flow.

Guide:

• Surface-mounted hand dryer shall be fabricated from one-piece 5 ⁄64" (1.9mm) thick steel. Cover shall have a white epoxy coating. Back base shall be fireresistant plastic ABS UL 94-V0. Dryer shall be fitted with an infrared electronic sensor, zamak air outlet grill and shaded pole motor with safety thermostat and self-resetting thermal cut-off at 266ºF (130ºC). Dryer shall operate at 60 dB while delivering 194 CFM of air at 125.6°F (52ºC) and 4,181 LFM during user-controlled drying cycle. Dryer shall have a total power of 1,640 W (2.2 Hp) with a consumption of 13.6 A (2905-2873) or 7 A (2905-2873CE).
• Overall dimensions: 117 ⁄8"H x 101 ⁄16"W x 5½"D (302mm x 256mm x 140mm).
• Weight: 9.8 lb (4,45 kg).