Beta Tools 059081136 5908VU/2T 161 Tools in Thermoformed Tray

059081136 Includess Only:

• Combination wrenches 6÷21 mm
• Combination wrenches 22 - 24 - 27 - 30 - 32 mm
• Pin punches Ø 2 - 3 - 4 - 5 - 6 mm
• Centre punch Ø 4 mm
• Double open end wrenches 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17
• 18x19 - 20x22 - 21x23 - 24x26 - 27x29 - 30x32 mm
• Offset hexagon key wrenches 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm
• Double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
• Offset hexagon key wrenches 2-2,5-3-4-5-6 mm
• Drivers for Torx head screws, with handles T10-T15-T20-T25-T27-T30
• 1/2" Square drive hexagon sockets 10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-30-32 mm
• 1/2" drive, Socket drivers for hexagon screws 5-6-8-10-12 mm
• 1/2" wobble Extension bar 125 mm
• 1/2" wobble Extension bar 250 mm
• 1/2" Drive universal joint
• 1/2" Drive sliding T-handle 305 mm
• 1/2" Drive reversible ratchet
• 1/4" hexagon sockets 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm
• 1/4" Socket drivers for hexagon screws 2,5-3-4-5-6-8 mm
• 1/4" Drive Extension bar 50 mm
• 1/4" Drive Extension bar 150 mm
• 1/4" Drive universal joint
• 1/4" drive spinner handle
• 1/4" drive swivel T-handle 115 mm
• 1/4" reversible ratchet
• Heavy-duty Diagonal cutting nippers 160 mm
• Half-round needle nose pliers 180 mm
• Extra-long needle nose pliers 160 mm
• Circlip pliers straight, internal 180 mm
• Circlip pliers bent, internal 170 mm
• Circlip pliers straight, external 175 mm
• Circlip pliers bent, external 175 mm
• Slip joint pliers boxed joints 250 mm
• Self - locking pliers 240 mm
• ScrewDrivers for cross head Phillips screws 2,5x50-3x75-3,5x100-4x125-5,5x100-5,5x150-6,5x150 mm
• ScrewDrivers for cross head Phillips screws 8x150-8x200-10x200 mm
• Screwdriver for slotted head Screws, extra-short series 4x30-6,5x30 mm
• ScrewDrivers for cross head Phillips screws PH0x60-PH0x100-PH1x80-PH1x120-PH2x100-PH2x150 mm
• ScrewDrivers for cross head Phillips screws PH3x150-PH4x200 mm
• Screwdriver for cross head Phillips Screws, extra-short series PH1x30-PH2x30 mm
• Flat chisels, ribbed type 100-200 mm
• Engineer's hammer 300 g
• Soft face hammer Ø 35 mm
• Second-cut square files 200 mm
• Second-cut triangular files 200 mm
• Second-cut flat files 200 mm
• Second-cut half-round files 200 mm
• Second-cut round files 200 mm