Assured Automation WM-NLCH-100-R/1P WM-NLCH Series Hot Water Meter

Water flows through the meter’s strainer (inlet and internal) and into the measuring chamber where it drives the impeller. A driving magnet transmits the movement of the impeller to a driven magnet located within the sealed register. The magnet is connected to a gear train which translates the impeller rotations into volume totalizers displayed on the meter’s register dial face.

The WM-NLCH Series water meter is top loaded and consists of three basic components: main case, measuring chamber, and head ring.

Features:

• All parts in contact with water are constructed of corrosion-resistant materials
• Body and coupling are made with low-lead brass alloy C87850 and meets potable water standards
• Impeller is the only moving part in contact with water, giving the meter long life and consistantly reliable operation
• Extra filter at the inlet of the meter body permits cleaning without having to open the meter
• Dial plate design in US Gallons
• Optional check valve to avoid reverse flow (lead-free)
• Optional pulse output consisting of plastic housing with 2-wire (red and black) reed switch and cable
• Max. Pressure: 150 psi
• Max. Temperature: 194°F
• Max. Reading: 050, 075, & 100: 9,999,999.99 150 & 200: 9,999,999.9
• Accuracy: Normal Flow: ±1.5% / Low Flow: ±3%
• Body & Couplings: EcoBrass
• Internals: Engineered thermoplastic
• Magnet: Alnico
• Sensor: Reed switch
• Maximum Current: 10mA
• Maximum Voltage: 24VAC/vDC
• Cable Length: 5’ standard, 2000’ max. run
• 1 Pulse Output / gal.