GENERAL |
Sampling Frequency | 128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz) |
Data Storage Rate | 1 per second (200ms also available on PEL 105) |
Demand Period Storage Rate | User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes) |
Recorded Parameters (Single- and Poly-Phase) | V, I, W, VA, var, PF, Tan, Wh, VAh, varh, THD (V and I), Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF |
Event Log | Tracks and records status changes and error messages along with recorded data |
Front Panel Indicator LEDs | Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status |
Storage Capacity | SD card included / SD cards up to 32 GB formatted FAT32 are supported |
Inputs Voltage | PEL 102/103: 4 input channels; PEL 105: 5 input channels via 4mm safety banana jacks |
Current | PEL 102/103: 3 current input channels ; PEL 105: 4 input channels via custom 4 pin jacks that accept AEMC probes and sensors |
ELECTRICAL |
VOLTAGE MEASUREMENT | PEL 105 RANGE |
50/60Hz | 42.5 to 69Hz |
Single-Phase RMS Voltages | 10 to 1000Vrms |
Phase-to-Phase RMS Voltages | 17 to 1000Vrms |
400Hz | 340 to 460Hz |
Single-Phase RMS Voltages | 10 to 600Vrms |
Phase-to-Phase RMS Voltages | 17 to 600V |
DC | 10 to 1000V |
PT Ratios | - |
CURRENT MEASUREMENT | 196A*** |
Nominal range for current probes supplied with kit. See chart on pg 11 for other probes | 200mA to 10,000A |
CT Ratios | Programmable from 1:1 to 25,000:1 (probe dependent) |
POWER MEASUREMENTS | RESOLUTION |
Active Power (P)* E= 10^18 | 0.001W |
Reactive Power (Q)* | 0.001var |
Apparent Power (S)* | 0.001VA |
Power Factor | 0.001 |
Tangent φ (active/reactive power ratio) | 0.001 |
ENERGY MEASUREMENTS |
Active Energy (EP) | 1Wh |
Reactive Energy (EQ) | 1varh |
Apparent Energy (ES) | 1Vah |
THD | ± 655% |
Individual Harmonics | 1 to 50 displayed in percentage; 1 to 7 at 400Hz |
External Supply | 110V/250V (10%) @ 50/60Hz; 400Hz |
Power From Phase Measurement | PEL 102/103: requires optional Power Adapter Cat #2137.77; PEL 105: 100V to 1000V ac |
Back-Up Power Source/Charge Time | Rechargeable 8.4V NiMH battery pack / Approximately 5 hours |
Battery Life | 30 minutes minimum, 60 minutes typical |
MECHANICAL |
Communication Ports | USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 **/ PEL 105 only: Wi-Fi |
Dimension/Weight | PEL 105: 10.6 x 7.1 x 9.65" (270 x 180 x 245mm) / 8.8lbs (4kg) |
Case | PEL 105: Polycarbonate UL94 V1 rated |
DISPLAY |
Display Type | PEL 105: 4.2 x 3.3" (107 x 84mm), four line, monochrome, backlit LCD with adjustable brightness & contrast |
ENVIRONMENTAL / SAFETY |
Operating Temperature/Relative Humidity | EL 105: -4° to 122°F (-20° to 50°C) / 45 to 75%RH |
Storage Temperature | PEL 105: -40° to 95°F (-40° to 35°C from 0 to 95%HR); -40° to 158°F (-40° to 70°C from 0 to 75%HR) |
Safety Rating / CE Rating | PEL 105: 1000V CAT IV, Pollution Degree 4 (closed) / Yes |
Index of Protection | PEL 105: IP67 with cover closed |
* Maximum value is current probe dependent |