Electric stirring motor | - 220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP
- Rotation: 450 rpm max. (±8%)
- Starting torque: 3.0 N.m
- Rated toruqe: 1.54 N.m
- Built-in gearbox ratio: 3:1 to 180:1
- Controller: Delta, UL listed
|
Pneumatic stirring motor | - Power: 1/4 HP
- Rotation: 450 rpm max. (±8%)
- Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
- Working temperature: -10C to +70C
- For constant use: set rpm to 80% of maximum rpm
- Motor lubricant
- Check/replenish/replace every 500 hours
- Air lubricant
- Type: JIS K2213-1 (ISOVG32)
- Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32
- Speed: 2-3 drops per minute
- For safety purpose, detach compressed air supply when not in use, left un-attended or at night
- Do not run motor un-loaded
- Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
- Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
- Make sure exhaust port/hole is clear from any debris or blockage
- Check every 2-3 days: Air Lubricant, Air Filter water drain
|
Port configuration | - Lid: 6" triclamp
- Center motor port: 3" triclamp
- Drain port: 6" triclamp
- Drain port on/off valve: 2" triclamp
- Vacuum port: 1.5" triclamp
- Condenser recirculating fluid port: 1/2" female NPT
- Vessel jacket recirculating fluid ports: 1" female NPT
|
Main vessel | - Volume: 100L
- Material: 316L grade stainless steel
- Interior finish: ElectroPolished
|
Agitator | - Structure: propeller, 3-blade, dual-layer (standard)
- Style: quick-change
- Material: 316L grade stainless steel
- Detachable length: 20 inches
|
Center fluid jacket | - Volume: 22L
- Material: 304 grade stainless steel
|
Outer insulation jacket | - Sealed
- Material: 304 grade stainless steel
|
Collection tank | 10L x 2 |
Material | - All wetted parts 316L grade stainless steel on main reactor body
- Rest of reactor in 304 grade stainless steel
|
Main Condenser | - Style: shell and tube heat exchanger
- Number of tubes: 70
- Condensing area: 0.89 m2
|
Pressure | Ultimate vacuum level: 1 Torr |
Temperature range | -55°C to +250°C (-67°F to +482°F) |
Temperature sensor/display | - Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp
- Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp
|
Sealing gasket | Food grade Viton |
Main Mounting Frame | Heavy duty 2 x 2" 304 grade stainless steel, mounted on four casters |
Drain port ground clearance | - Drain port: 19.5 inches
- Drain valve: 14 inches
|
Unit/shipping weight | 255 Lbs / 350 Lbs |
Unit/shipping dimensions | 38 x 32 x 82" (WxDxH |