Across IH25A 25 kW Mid-Frequency Compact Induction Heater w/ Timers 30-80 kHz

25 kW Mid-Frequency Compact Induction Heater w/ Timers 30-80 kHz

Features:

• Ease of use: just plug in the power and connect the water cooling system, our simple instruction allows you to use the heater in 15 minutes.
• Light weight (only 60 Lb), portable (with built-in handle), instant heat and up to 90% energy savings.
• Precise control with digital time and current displays.
• Remote foot switch for safer operation.
• Dual automatic and manual modes.
• Optional graphite and silica crucibles available. (melting material decides crucible type, weight and size of the material decide crucible size)
• Custom coil design (fixed coil or coil on a cable so it can be used by hand like a wand).
• Frequency is non-adjustable, it depends on the coil design (diameter of turns, numbers of turns, copper tubing diameter and total length).
• ISO 9001:2008 registered manufacturer.

Safety:

• Overvoltage protection : machine shuts down when input voltage is over 495V. Overvoltage light will turn on and buzzer will sound continuously. Alarm and light shut off automatically when voltage goes below 495V.
• Overheat protection : if sensor detects heat radiator temperature is over 55°C, machine will shut down, overheat light will turn on and buzzer will sound continuously. Increase water pressure or lower water temperature until alarm goes off itself.
• Overcurrent/malfunction protections : machine will shut down, indicator light turned on and buzzer sounds continuously if one of these situations occurs:
  • One of the machine parts becomes overheated
  • Interfering signal detected
  • Short circuit between work pieces and induction coils
  • Machine malfunctions
  • Induction coils touching each other
  • Input voltage is too low
• Low water pressure protection : if water pressure goes below 29 PSI, machine will shut down, water protection light will turn on and buzzer will sound continuously.

Includes:

• IH25A induction heater (1 pc)
• Foot switch (7 ft) (1 pc)
• Induction coil: 5mm diameter, 75x300mm IDxL, adjustable height. Coil is insulated to prevent sparks caused by work piece touching the tube. (2 pcs)
• Stainless steel hose clamp (8 pcs)
• Fuse (5 pcs)
• Induction coil adapter (to protect the coil connectors on the machine, good for users who change coils frequently) (2 pcs)
• Operation manual (1 pc)