| Analog unit |
| Input sensitivity | Over 0.15µV/d (d=minimum division) |
| Zero adjustment range | -35mV to +35mV (-7mV/V to +7mV/V) |
| Load cell excitation | DC5V±5%, 120mA
Remote sensing function included
Up to 8 load cells (350Ω) can be connected |
| Temperature coefficients | Zero; ±0.02µV/°C (Typ.)
±0.1µV/°C (Max.)
Span; ±3ppm/°C (Typ.)
±15ppm/°C (Max.) |
| Nonlinearity | 0.005% of F.S. |
| Input noise | Less than 0.3µVp-p |
| Maximum measurement voltage | -35mV to +35mV (-7mV/V to +7mV/V) |
| Input impedance | Over 10MΩ |
| A/D conversion method | Delta-sigma modulation |
| Internal resolution | Approx. 16,000,000 |
| Display resolution | 999,999d (less than 20,000d recommended) |
| Sampling rate | 100 times/sec. |
| Calibration | Actual load calibration or digital span
calibration not using actual load |
| Digital unit |
| Display elements | Weighing display:
7-segment 6-digit green LED
Character height of 14.6mm
Polarity display: 1 green LED
Situational display: 6 red LEDs |
| Measurement data display | Display switchable between net and
gross weight
Display range: 0 to 999,999d
(Select between 1, 2, 5, 10, and 50 for
minimum division "d")
Units: Affix a "g", "kg", or "t" unit sticker |
| Status display | ZERO, STABLE, GROSS, NET, HOLD and
a light which can be given a custom
function by the user |
| External output components |
| Standard serial output (ch1) | RS-232C 9-pin Dsub (male) |
| Standard serial output (ch2) | 20mA current loop signal
(For connection with A&D peripherals) |
| Control I/O | 3-point input function selection
(Non-voltage connection point or
open collector)
3-point output function selection
(open collector output) |
| Modbus-RTU | Supported with RS-232C (included as
standard) or RS-232C/RS-485 (optional). |
| Basic specifications |
| Power source voltage | AC100V to 240V 50/60Hz |
| Power consumption | Approx. 10VA |
| Operating temperature and humidity | -10°C to 40°C/85%RH or less
(Condensation must be avoided) |
| Dimensions | 144(W) x 72(H) x 125(D) mm/ 5.67" x 2.84" x 4.92"
(Protrusions included, cable excluded) |
| Panel cut dimensions | 138 x 68 mm/ 5.43" x 2.68" |
| Dust/water protection | The IP65 display when mounted into
a panel
(Using included rubber packing |
| Weight | Approx. 800g/ 1.76 lb. |
