| Analog Input and A/D Conversion |
| Input sensitivity | Up to 0.25 µV/division |
| Input signal range | -1 mV~15mV |
| Load cell excitation voltage | 5V DC ±5%, 60 mA with sense voltage input |
| Load cell drive capacity | Maximum 4 x 350 Ω load cells |
| Temperature coefficient | Zero | ±(0.2 µV + 0.0008 % of zero adjustment voltage)/°C: (typ.) |
| Span | ±0.0008%/°C: of reading (typ.) |
| Non-Linearity | 0.01 % of full scale |
| Maximum input noise | Less than 0.4 µVp-p |
| Input impedance | 10 MΩ or more |
| A/D conversion method | Integrating dual slope type |
| A/D resolution count | 40000 counts |
| AID conversion rate and display update rate | Approximately 10 times/s (unstable), 5 times/s (stable) |
| Maximum display resolution | 20000 (permissible 40000) |
| Digital Section |
| Measurement display | 7 segment, Vacuum fluorescent display tube |
| Character color | Cobalt-blue |
| Character height | 20 mm |
| State indicator SSymbol | Minus sign, Zero point, Stable, Net, Preset tare value, |
| Storing accumulation data, Percentage, |
| Various state indicator (trianglel, 2,3) |
| Character color | Cobalt-blue |
| Comparison result | HI, OK, LO |
| Character color | Red for HI and LO, Green for OK |
| Unit | | kg, g, t (lb, oz, Ib-oz / catty, tl, catty-tl: depends on the region) |
| Character color | Cobalt-blue |
| Interface |
| RS-232C interface | Serial interface for communication (D-Sub 9P) |
| RS-422/485 interface | Serial interface for communication, control (terminal block) |
| Current Loop output | 20mA, Passive type (DIN 8P) |
| Analog output | 4-20mA, free scaling output (terminal block) |
| External Control Input | 3 (or 1) contact input terminals, selected functions (DIN 8P) |
| Relay output | 3 point (DIN 8P or terminal block)
Capacity: 50V AC/DC, maximum current 100mA (resistive load)
Comparison mode selection
HiHi, Hi, OK, Lo, LoLo output for limit comparison
Zero band, preliminary, free fall, final for setpoint comparison |
| Printer |
| Built-in printer | 5 x 7 dot matrix type, 16 digits per line |
| General |
| Power supply | Selection by internal connector from 100V AC, 120V AC, 200V AC and 230V AC, +10% to -15%, 45Hz to 65Hz |
| Power consumption | Approximately 20VA |
| Operation temperature | -10°C to +40°C (14°F to 104°F) |
| Operation humidity | 85% R.H. (no condensation) |
| Mass | 1300g approximately/ 2.87lb. |
| Dimensions | 275(W) x 111 (H) x 159(D) mm/ 10.83" x 4.37" x 6.26" |
