| General |
| Power supply | 85 to250 VAC, 50 or 60Hz, (Stable power source) |
| Power consumption | Approximately 30 VA |
| Pysical dimensions | 192 (W) x 96 (H) x 135 (D) mm/ 7.56" x 3.78" x 5.32" |
| Weight | Approximately 1.8 kg/ 3.97 lb. |
| Panel cutout size | 186 x 92 mm |
| Operation temperature | -5°C to 40°C |
| Battery life of backup RAM | typ. 10 years at 25°C . 5 years at 40C. |
| Analog to Digital Unit |
| Input sensitivity | Up to 0.3 µV / digit |
| Zero adjustment range | 0 to 2 mV /V
(0 to 20 mV) |
| Measuerment range | 0 to 3.2 mV /V
(0 to 32 mV) |
| Input impedance | 10 MΩ |
| Loadcell excitation voltage | 10 V DC 5% |
| Maximum loadcells | 8 pieces in pallel with 350Ω loadcell |
| Span temperature coefficient | 8 ppm/ °C |
| Zero temperature coefficient | 0.2 µV + 8 ppm/°C of dead load typ. |
| Non-linearity | 0.01 % of F. S. |
| Input noise | Below +/-0.3 µVp-p |
| A/D conversion | Δ - Σ conversion |
| A/D resolution | Approximately 1/1,000,000 |
| Maximum display | 16000 (to be able cancel limitation) |
| Sampling rate | 100 times per second |
| Digital span function | loLoadcell offset, calibration using key operation to enter
the sensitivity, resolution 1/1000 |
| Re-calibration at A/D board repacement |
| | Omissible (resolution 1/500) |
| Backup method | A/D data: EEPROM |
| Calibration: Flash memory |
| Function: Flash memory |
| Material code data: Backup RAM or flash memory |
| Recipe code data Backup RAM or flash memory |
| Display |
Display
Main display | Fluorescent display, cobalt blue, height: 18mm, 7seg., 7 figures |
| Sub-display | Fluorescent display, cobalt blue, height: 5mm,
7seg., 54 figures and 5x7 dots, 54 figures |
| State indicator | Fluorescent display, cobalt blue, 8 pieces, 10 sSymbols, 5x7 dots |
| Unit indicator | Fluorescent display, cobalt blue, height: 11mm, 5x7 dots, 2 figures |
| SSymbols | Fluorescent display, cobalt blue, height: 11mm, 5x7 dots, 2 figures |
| Weighing |
| Weighing mode | Batch Weighing Mode:
Normal batch weighing, loss-in weight |
Sequential Weighing Mode:
Normal batch weighing, loss-in weight |
| Element of sequential weighing mode | Compensation Sequence
Approach Sequence
Discharge Sequence
Plain Recipe Sequence
Automatic Selection of Supplying Mat
Nozzle Control Sequence (vacuum cleaner)
Mixture Sequence
Safety Check Function
Pause and Emergency Stop
Restart Sequence
Automatic Free Fall Compensation
Real Time Free Fall Compensation |
| Code data |
| Max. number of material code | 100 codes |
| Element of material code | Name, hopper No., Target value, free fall, preliminary,
optional preliminary, over, under, accumulation count,
accumulation weight, tare value, compensation open
timer, compensation close timer |
| Max. number of recipe code | 100 codes |
| Element of recipe code | Name, material codes (max. 10, in mixture order),
accumulation count, accumulation weight |
| Connectors and interfaces |
Power supply terminal, Loadcell terminal, Standard I/O terminal, Standard RS-485
interface, Current loop, keys and display |
