3M 36864 60455053193 Trap Protection Material Dispenser

3M Personal Safety, 60455053193, Dirt Trap Protection Material Dispenser, 56", Floor Model

Features:

• Designed for use with 3m Dirt Trap Nonwoven Protection Material Applicators
• Conveniently dispenses 3M Dirt Trap Nonwoven Protection Material
• High-strength magnets secure unit on vertical metal surfaces
• Magnets allow moving dispenser to new locations
• Durable metal construction for use in automotive paint shops

Designed for use with 3M Dirt Trap Nonwoven Protection Material Applicators, our 3m Dirt Trap Nonwoven Protection Material Dispensers make it easy to unroll just the right length of 3M Dirt Trap Nonwoven Protection Material (sold separately) for smooth application without folds or ripples. Metal dispensers are durable and easy to use - simply place the dispenser where desired and smoothly unroll the material. 3M Dirt Trap Material Floor Applicator Dispenser, pN 36864 is fully portable for applying protection material to paint booth. Both the floor dispenser and the 3M Dirt Trap Material Dispenser, feature high strength magnets that secure it on vertical metal surfaces. The magnets allow relocating the dispenser to another site if desired.

Directions for installing 3M Dirt Trap Protection Material on walls

1. Install the first section closest to the floor
2. Attach the dispenser to the adjacent wall
3. Pull the fabric out the length of the booth
4. Use the squeegee to attach the far end of the material at the corner
5. Work your way back to the dispenser aligning the material and attach to the wall
6. Cut the material at the dispenser
7. Squeegee the entire wall section to make sure it is attached completely
8. Re-mount the dispenser at the level of the second section
9. Overlap the first section (1" or less)
10. Use the same method to finish installing 3 wall sections
11. After the third section is installed, cut out around the windows and light
12. Important - Material should be replaced prior to 150 bake cycles for clean and easy removal

Directions for installing 3M Dirt Trap Protection Material on floors

• Attach the dispenser to the end wall for the floor installation
• Pull out the material and align the first floor section close to the wall
• Continue installing sections as needed
• The dispenser may also be placed on the floor for dispensing
• Important - Avoid covering the floor grate (material may restrict air flow)