TPI, 709R, TPI Combustion Efficiency Analyzer and Differential Manometer 709R with Ni-MH Battery
709R Includes Only:
- TPI 709R Instrument
- Rubber Boot (A765)
- Battery Charger (A766)
- Soft Carrying Case (A768)
- Flue Sampling Probe (A770)
- In-Line Filter assembly installed on Flue probe (A794)
- Temperature Probe (GK11M)
- Mini Pump Protection Filter Assembly and spare filters (A763)
- Exhaust Spigot (removable) (A764)
- Instruction Manual
The TPI 709R combustion analyzer uses state of the art electrochemical sensors. This sensor technology provides the longest lasting, most accurate and reliable means for performing combustion tests. The sensors in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 709R will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up.
Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensors in your analyzer are warranted for two years. This warranty does not cover sensors damaged through misuse of the analyzer.
Features:
- Measure CO, O2 & Flue Temperature
- Calculate CO2, CO/CO2 Ratio, Efficiency & Excess Air
- Dual Input Differential Manometer – Great for performing Standing Pressure or Let By/Tightness Tests
- Dual Input Differential Thermometer – Ideal for measuring & recording Flow & Return Temperatures
- Ambient CO Analysis
- Diagnostic software & technical helpline combine to save time and money on reduced downtime as many of the reported faults can be rectified over the phone keeping you and your instrument working
- Unique external water trap filtration system as standard on all kit options preventing loss of downtime or additional costs due to potentially damaged sensors caused by water ingress
- 10 Fuel options including Wood, Light & Heavy Oil, LPG and Natural Gas
- Will not shut off if CO ppm is above 15ppm for increased safety for both the user and the instrument
- Unique in-line pump protection filter fitted as standard across all kits preventing loss of downtime or additional costs due to a potentially damaged pump caused by dust/dirt ingress
- Protective rubber boot as standard to protect the FGA
- Re-Chargeable battery housed in a separate compartment ensuring no heat transfer when using on the mains to affect gas readings
- All kits come supplied in a soft carry case to protect not only the FGA but all of your accessories
- Capability of sending Live or Stored readings to an optional IR Printer