To customize your own system, simply start with a solid-state speed controller, add one of the mixing heads depending on your speed and torque requirements, select a shaft and propeller, then choose from a clamp and stand that best suit your application. View our line of laboratory mixer accessories.
Controllers: Solid-state controller offers precise speed control with a 100:1 adjustment range. A separate "forward/off/reverse" switch works independently from the speed control dial-allowing you to repeat mixer speed settings from one run to the next. Electronic control maintains speed regulation better than ±2%. Torque limiting provides greater system protection and reduced motor gear failure. An LED indicates when power is on. Controller housing is IP23 rated.
Remote controller is connected to the mixer head via a 6-ft (1.8-m), three-wire cord-protects electronics from hazardous spills or splashes. Controller measures 7" W x 3 3/16" H x 4 7/8" D (178 mm W x 81 mm H x 124 mm D).
What's included: 115 VAC model has a 6-ft (1.8-m) cord with grounded plug. The 230 VAC model has an 8-ft (2.4-m) cord with modular line cord and IEC320/CEE22 connector. When ordering, specify country of destination to receive correct line cord.