Environmental Conditions | |
Operating temperature | -25°C to +70°C |
Storage temperature | -40°C to +85°C |
Calibration temperature | 20...28°C |
Relative humidity | < 95% RH (non-cond.) |
Protection degree | IP20 |
Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications | |
Dimensions (HxWxD) | 113 x 6.1 x 115 mm |
Weight approx. | 70 g |
DIN rail type | DIN EN 60715/35 mm |
Wire size | 0.13...2.5 mm2 / AWG 26...12 stranded wire |
Screw terminal torque | 0.5 Nm |
Vibration | IEC 60068-2-6 |
2...25 Hz | ±1.6 mm |
25...100 Hz | ±4 g |
Supply voltage | 16.8...31.2 VDC |
Max. required power | 1.20 W |
Max. power dissipation | 0.43 W |
Isolation voltage | |
Isolation voltage, test / working | 2.5 kVAC / 300 VAC (reinforced) |
Zone 2 / Div. 2 | 250 VAC |
Response time | |
Response time (0...90%, 100...10%) | < 7 ms or < 44 ms |
MTBF, acc. to IEC 61709 (SN29500) | > 187 years |
Signal / noise ratio | Min. 60 dB (0...100 kHz) |
Signal dynamics, input | Analog signal chain |
Signal dynamics, output | Analog signal chain |
Programming | DIP-switches |
Cut-off frequency (3 dB) | > 100 Hz or 10 Hz (selectable via DIP-switch) |
Accuracy | < ±0.05% of span |
Temperature coefficient | < ±0.01% of span / °C |
EMC immunity influence | < ±0.5% of span |
Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Measurement range | -23...+23 mA |
Programmable measurement ranges | ± 10 and ± 20 mA |
Input voltage drop | < 1 VDC at 23 mA |
Voltage input | 0.02°C/°C or ≤ ±0.01%/°C |
Measurement range | -11.5...+11.5 V |
Programmable ranges | ±5 and ±10 V |
Input resistance | ≥ 1 MΩ |
Output specifications | Yes - selectable via DIP-switch |
Current output | > 800 Ω |
Signal range | 0...23 mA |
Programmable signal ranges | 0 / 4...20 mA |
Bipolar wiring and programming set-up | ±10 and ± 20 mA |
Load ( at current output) | ≤ 300 Ω per channel |
Load stability | ≤ 0.002% of span / 100 Ω |
Current limit | ≤ 28 mA |
Voltage output | 0...10 VDC |
Signal range | 0...10 VDC |
Programmable signal ranges | 0/1...5 and 0/2...10 V |
Load ( at voltage output) | ≥ 10 kΩ |
I.S. / Ex marking | II 3 G Ex ec IIC T4 Gc |
ATEX | II 3 G Ex ec IIC T4 Gc |
IECEx | Ex ec IIC T4 Gc |
FM, US | Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4 |
FM, CA | Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, Ex nA IIC T4 |
Observed authority requirements | 2014/30/EU |
EMC | 2014/30/EU |
LVD | 2014/35/EU |
ATEX | 2014/34/EU |
RoHS | 2011/65/EU |
EAC | TR-CU 020/2011 |
EAC Ex | TR-CU 012/2011 |
Approvals | KEMA 10ATEX0147 X |
ATEX | KEMA 10ATEX0147 X |
IECEx | KEM 10.0068X |
c FM us | FM17US0004X / FM17CA0003X |
c UL us, UL 61010-1 | E314307 |
CCC | 2020322310003554 |
EAC Ex | RU C-DK.HA65.B.00355/19 |
DNV Marine | TAA00001RW |